Tubolito TUBO MTB PSENS 27.5" x 1.8- 2.5" inner tube, 42 mm tire valve
The built-in NFC chip in the Tubolito PSENS allows for simple, quick and battery-free tire pressure measurement using the iOS (iPhone 7 and above) and Android (Android version available on the Play Store: summer 2021) application.
No battery, no charging, just put the phone to the shell and the pressure value will be shown on the display!
PSENS technology is available in TUBO MTB 29 or 27.5 and for tire widths 1.8"- 2.5"
Inner weight Tubolito PSENS 29" = 93g and 27.5" = 90g
.
New on the market - We present a revolutionary product - Tubolito bicycle inner tubes
By using high-tech thermoplastics in combination with unique production technology, it was possible to produce ultra-light and at the same time durable bicycle inner tubes, which are an excellent alternative to the classic inner tube.
Why Tubolito souls?
The advantage is up to 2.7 times lower weight and 2 times higher resistance against defects, and last but not least, better storage and easy handling when fitting the inner tube to the rim.
Who is Tubolito intended for?
The potential could best be used by road cyclists as a substitute for a regular soul. In road cycling, every gram counts - and the Tubolito is incredibly light compared to light road inner tubes. And up to twice the defect resistance.
Also, customers with MTBs and especially with electric bicycles will certainly appreciate the fact that they have inner tubes with twice the resistance to punctures.
Key Features of Tubolito Souls:
- Great storage capacity – when folded, it takes up half the size of a regular tube
- Lighter and more durable thanks to the use of innovative material.
- It withstands twice the pressure in the puncture test under pressure compared to a regular tube
- Compared to ordinary soul, better resistance in the test against snapping.
- Simple gluing with Tubolito patches.
- Suitable for use in casings containing sealant.
- Holds air just like a regular soul.
- Can be used with extension valves.
- Tubo MTB can only be used with disc brakes. Tubo Road can be used with both rim and disc brakes. The Tubo Road passed the DIN4210 test (15 minutes of braking with 10x10 second breaks) on both aluminum and carbon rims.
- In the test where the brakes are applied continuously until a defect occurs, the Tubolito tube did not lose pressure explosively like a regular tube, but a slow defect occurred.
- Rolling resistance at a speed of 28.8 km/h. it is lower by 4.6W with Tubo MTB and lower by 2.3W with Tubo ROAD compared to a regular tube.
- The maximum and minimum pressure is governed by the tire used.
- The Tubolito inner tube can be temporarily inflated with CO2, but it is recommended to immediately deflate and inflate it with regular air after reaching the distance.
S-TUBO (replacement tube) has a thinner wall compared to TUBO and a screw-out valve for better storage. S-TUBO is intended as a replacement tube, it does not have all the properties of the Tubolito tube, its advantages are ultra-low weight and small dimensions. The size of the packed S-TUBO replacement inner tube is only an incredible 3.5 x 3.0 cm! Easily fits into any jersey pocket. Despite its low weight and dimensions, its durability is at the level of an ordinary soul.
- Weight Tubo MTB 26" = 78g, 27.5" = 82g, 29" = 85g
- Weight Tubo MTB PLUS 27.5+" = 105g, 29+" = 110g
- Tubo ROAD weight = 38g
- Weight of Tubo CX/GRAVEL = 55g
- Weight of Tubo CITY/TOUR = 91g
- Weight Tubo BMX 20" = 39g
- Weight S-Tubo MTB 26" = 42g, 27.5" = 44g, 29" = 45g
- Weight of S-Tubo ROAD SV42 = 23g, SV60 = 26g
Install the tube into the rim with the Tubolit inflated to 0.2-0.5 bar before inserting it into the rim, and make sure that the valve faces inward to avoid unnecessary stress on the material.
Valve | Presta valve |
product ID | 186529 |
