Kohla Summit Skin Mixmohair strips, black
Do you need reliable tracks that have a long service life, excellent "driving" properties and hold well on frozen snow and in spring temperatures? That's exactly what the Summit Skin SMU Mixmohair risers are. With a 50:50 slip and climb ratio, they are ideal for fast hill climbs. Then you can put all your energy into a great race. A comfortable exit will be supported by the impregnation of the fibers, which prevents snow from sticking to the belts, and the membrane, which does not let moisture into the glue, and thus holds the belts firmly even in variable conditions throughout the season.
- Material of the rising layer: 65% mohair / 35% nylon
- Adhesive layer material: Hot-Melt adhesive
- Supplied widths: 120 mm
- Supplied lengths: 156-162 cm, 163-169 cm, 170-176 cm, 177-183 cm
- Glide/climb ratio in %: 50 / 50
- Temperature: -30 °C
- Diaphragm: Yes
- Impregnation: Yes - fluorocarbon
- Can be trimmed for any ski: yes
- Package includes: bag, foil, knife
Reliable glue in all circumstances
Summit Skin are made with the help of the best technologies on the market. Thousands of ski alpinists rely on the proven Hot-Melt adhesive for a long time:- also suitable for severe frosts - they hold reliably even at -30°C
- snow does not get between the slide and the belt - it maintains excellent grip even on the edges of the slide
- it is necessary to use separation films or nets
- the glue lasts a long time - it is resistant to wear
- environmentally friendly - without solvents and other toxic substances
- the strips come off really easily without brute force
Climbing belts with a long service life
Summit Skin SMU Mixmohair belts are intended for frequent use. The combination of high-quality mohair and nylon (65% mohair and 35% nylon) ensures an optimal ratio between excellent glide, climbability and long life:- Mohair has excellent sliding properties, which saves a lot of effort when climbing.
- Nylon (synthetic polymer) lends the belts more resistance and has a better wet slip than mohair in spring weather.
- "W" fiber braiding, which is more durable, with good glide and holds well when climbing even on frozen snow.
- The layer with fibers is made of a mixture of high-quality cotton and polyester - increased resistance to tearing and wear.
It holds firmly even in spring weather
In order for the climbing belt to reliably hold on the slide, both the slide and the adhesive layer must be dry. If moisture from the snow gets on the glue, it stops working, peels off, freezes and doesn't hold. For this reason, these Summit Skin SMU Mixmohair climbing belts use the technology of applying a PU membrane between the layer with braided hair and the layer with applied glue, and the belts are therefore 100% waterproof. This way you can enjoy your ski tour without worries, because the glue holds firmly, does not freeze and works great even in spring winters on wet snow.Impregnated climbing belts
Good risers must hold well on the skis and glide well on the snow. Wet snow can stick to wet tracks, and there is nothing more annoying than having to drag half a kilo of snow on your leg. The belts stop sliding, it takes a lot of force unnecessarily. All Summit Skin climbing belts are impregnated with fluorocarbon and snow does not stick to them.- The impregnation repels moisture and thus prevents snow from sticking to the fibers.
- The impregnation improves the glide - climbing belts are faster and movement is easier.
- Impregnation increases the resistance of the fibers - climbing belts last longer.
- Climbing belts dry faster.
- The impregnation is environmentally friendly - without solvents and toxic substances and is biodegradable.
Still like new
With frequent use or after several seasons, the impregnation effect may decrease. In this case, you can easily renew it with KOHLA DRY CLIMB skin impregnation spray or KOHLA impregnation wax. The wax is small and convenient to have on a hike in a backpack, especially for a several-day transition.Do I attach straps to my skis?
Summit Skin SMU Mixmohair climbing straps can be attached to most skis - you can easily replace the steel eye with another attachment for a different type of tip. The parts are made of high-quality plastic and stainless steel materials that are resistant to frost and wear. Other tips and feet are not part of the package.- Tip: solid T-Bar tip (85 mm) that fits most skis.
- Heel: sewn plastic elastic strap and hook (K-Clip + Elastic Strap), which has an adjustable range of 12 cm.
Will the straps fit the width and cut of my skis?
For the easiest uphill climb, it is important to have the belt cover as much of the slide as possible. Therefore, it is important to choose the right width and length of the belts. Climbing strips Summit Skin SMU Mixmohair comes in a width of 120 mm and lengths from 156 to 183 cm in 6 cm increments, and you simply cut the strips 2.5 mm from the side exactly to the shape of your skis.Simple maintenance and service
- The belts are supplied with a bag and a cutting knife, nothing else is necessary for the belts and assembly.
- With KOHLA impregnation spray or wax, you can increase the water repellency of fibers, improve sliding properties and increase their resistance.
- In case of destruction of the attachment of the tip or the foot, the spare part can be easily replaced with a new one.
Adhesive layer: Hot-Melt
Material: 65% mohair|35% nylon
Impregnation: fluorocarbon
Tip attachment: T-bar 85
Heel attachment: K-clip|Elastic Strap
Type for splitboard: No
Weight: 0.6
Belt width: 120
Colour | black |
Material | mohair |
Sport | ski mountaineering |
product ID | 297199 |

There are currently no reviews