Climbing Technology Cric blocker, anthracite/orange
Multifunctional rope blocker with integrated pulley for mountaineering, work at heights and rescue. It is robust, practical and intuitive. It has four different modes of operation: output mode, single pulley mode, rope blocker/pulley mode, or pulley mode with blocker for pulling the load.
- Its versatility, compact dimensions and ease of use make it possible to shorten maneuvers with the rope to a minimum of time, material and space.
- Enables rope ascent in accordance with EN 567 / EN 12841-B standards (ascent mode).
- It can be used as a simple pulley to lift or carry a load in accordance with EN 12278 (pulley mode).
- The integrated pulley with ball bearings can be used as a simple redirection that facilitates rope ascent or lifting people without the need for additional connecting elements (rope blocker/pulley mode).
- It enables the direct lifting of the load, the creation of traction systems and the rescue or self-rescue of a person, e.g. falling into a crack (traction pulley mode with blocker).
- When used in pulley mode, the rope is freely movable in both directions. On the other hand, when using the traction pulley mode with a blocker, the rope can only run in one direction and is blocked in the opposite direction.
- When used in traction pulley mode with a blocker, the lifted load can be lowered by acting on a special cord connected to a cam inside the device.
- Easy opening with an intuitive release button allows quick installation of the device on the rope - regardless of the mode in which it will be used. Even with gloves or when working in difficult conditions.
- It is equipped with a steel cam with teeth that minimize rope wear, but effectively block it. In addition, the cam is designed with two grooves that limit dirt build-up, so the rope lock is very effective in any conditions (mud, frozen rope, etc.).
Parameters, certification and legislation
- Patent pending
- Weight: 150 g
- UIAA
- CE 0333
- Made in Italy
- EN 567:2013 for ropes with a diameter of 8–12 mm
- EN 12841:2006-B for ropes with a diameter of 10–12 mm
- EN 12278:2007 for ropes with a diameter of up to 13 mm
Designed for rope with a diameter of: 8-13
Block type: multifunctional | 4 variants
Roll type: ball
With blocker: Yes
Number of rolls: 1
Workload limit: 20
Limit load: 100
Workload limit on each side y: 10
Certification: CE 0333|EN 567:2013|EN 12841:2006-B|EN 12278:2007|UIAA
Gender: Unisex
Sport | climbing |
product ID | 232231 |
