Fenix ​​HP35R rechargeable headlamp, 4000 lm

The extremely powerful Fenix ​​HP35R rechargeable headlamp offers an unrivaled output of up to 4000 lumens (ANSI) and an afterglow of 450 meters. Excellent performance was achieved by using a powerful Cree XHP70 LED with a neutral shade and a pair of Luminus SST-20 LEDs with a warm shade of light and a high color rendering index of CRI 94.5 (Color Rendering Index). Warm light penetrates fog, rain and snow better, so you can especially use it in bad weather conditions. The headlamp is equipped with a remote reflector and a pair of smaller reflectors with a wide cone of light. The reflectors can be turned on separately or they can be started simultaneously in a combined mode. With intuitive control using a rotary and electronic switch, you can handle every situation with an overview.

Comfortable wearing on the head is ensured by a wide black perforated strap. If you only want to wear the headlamp on a helmet, then we recommend purchasing the Fenix ​​HP35R SAR version, which has an integrated helmet mount with NVG mounting and a non-flammable and anti-static rubber strap for work helmets.

For power, it uses a Li-ion battery with a capacity of 10,000 mAh, which is placed in a separate case on an adjustable cable. The case can be worn on the back of the neck, placed on a belt, in a pocket or backpack. This increases wearing comfort and in winter the batteries are better protected against frost. The battery case is equipped with a red light with a power of up to 20 lumens, a charge indicator and a charging USB-C connector. The charging USB-C connector also functions as an output, so the battery can also be used as a power bank for charging your mobile phone, GPS navigation and other USB devices.

The headlamp offers a total of 12 power modes. In the lowest mode with 5 lumens, it provides an excellent endurance of up to 500 hours (that is, more than 20 days). The body of the headlamp is made of aluminum alloy used in the aviation industry, so excellent cooling and resistance to damage is ensured. Designed specifically for search and rescue, caving and work use, this high-performance headlamp with a separate battery will also be appreciated by ski alpinists, mushers and other extreme sports and outdoor enthusiasts.

All parameters of the headlamp (luminous flux, operating time on batteries, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix ​​HP35R headlamp parameters

• A powerful Cree XHP70 LED with a neutral shade of 4500K and two Luminus SST-20 LEDs with a warm shade of 3000K and a high CRI of 94.5 are used, all with a lifespan of 50,000 hours.
• Twelve lighting modes:
• • High beam: 3000 lumens (5.7 hours) -> 800 lumens (11.7 hours) -> 350 lumens (28.4 hours) -> 50 lumens (120 hours).
  • Wide reflectors: 1200 lumens (8 hours) -> 400 lumens (30.8 hours) -> 50 lumens (120 hours) -> 5 lumens ( 500 hours ).
  • Combined mode: 4000 lumens (4.3 hours) -> 1200 lumens (8 hours) -> 400 lumens (18 hours) -> 50 lumens (120 hours).
• The combined mode creates a light cone with an afterglow of 450 meters (50853 cd), the long reflector shines up to a distance of 440 meters (48518 cd) and the wide reflector shines up to a distance of 122 meters (3746 cd).
• Digitally regulated for constant brightness.
• Intelligent protection against overheating and a proximity sensor preventing potentially dangerous situations.
• For power, it uses a Li-ion battery with a capacity of 10,000 mAh, which is built into a separate charging case with a red rear light.
• Battery case, can be placed on the back of the head, on the belt, in a pocket or backpack.
• Charging via a modern USB-C connector. Charging time 2 hours with a USB source with a power of at least 27 W.
• Power bank function - USB-C output for charging other USB devices with a power of up to 20 W (PD3.0/PD2.0 protocols).
• The battery case is equipped with a battery status indicator and a red light with the function of flashing (5 lumens) and constant light (20 lumens).
• The headlamp can be tilted in a few steps and thereby set the desired lighting direction.
• The body of the headlamp is made of an aluminum alloy used in the aviation industry.
• Impact resistant to a fall from a height of 2 meters.
• Weight of complete headlamp 433 grams (including straps and battery).
• Headlamp dimensions: 9.41 cm x 5.74 cm x 4.87 cm
• Battery case dimensions: 9.53 cm x 5.58 cm x 4 cm
• Dustproof and waterproof according to the IP66 standard (spraying with strong streams of water from all directions).
• The package includes a headlamp with a textile perforated strap, 2 plastic clips for attaching the cable to the head strap, 4 holders for attaching the head strap to the helmet, an extension cable for the battery case and a USB-C charging cable.
• For easy attachment to the helmet, the Fenix ​​ALG-03, ALG-04 holder can be purchased.
• The Fenix ​​APB-30 case, a powerful USB power adapter, a USB car adapter and a colored USB-C cable can also be purchased for the headlamp.

Using the Fenix ​​HP35R headlamp

The headlamp is turned on and off with a rotary switch on the right side. In the first position, the headlamp is turned off, by turning it to the second position, it turns on the long-distance reflector mode, by turning it to the third position, it turns on the wide reflector mode, and by turning it to the fourth position, the combination of both reflectors is turned on. Power modes in individual positions are cyclically switched by pressing the button on the side of the rotary switch.

The red light on the battery case is activated by holding down the button on the battery case for approx. 0.5 s. Individual presses then switch between flashing (5 lumens) and constant light (20 lumens).

Memory of the last set power mode - the headlamp has a memory and always turns on in the last set power mode of the selected reflector, with the exception of the highest modes of the long and wide reflector, instead it turns on in the second highest mode of the given reflector.

The length of the cable connecting the headlamp to the battery case can be increased using the extension cable that is included in the package.

Battery status indication - pressing the button on the battery case activates the battery capacity indicator (four lit LEDs 80-100%, three LEDs 60-80%, two LEDs 40-60%, one LED 20-40%, one flashing LED means 20% remaining battery capacity).

Charging - unfold the rubber cover of the USB-C connector on the battery case and use the included USB-C cable to connect it to a computer, USB network adapter or USB car adapter. Any mobile phone charger with a USB-C connector can also be used for charging. During charging, the indicator diodes on the battery case flash, after full charge they light up permanently. Charging a fully discharged battery takes about 2 hours when using a USB source with a power of at least 27 W. Using a weaker source will increase the charging time.

Activating the USB output (powerbank function) - connect the device you want to charge. The activation of the USB output is indicated by flashing diodes on the case.

Intelligent protection against overheating - if the temperature of the headlamp rises above 55 °C, it will automatically reduce power until its temperature stabilizes. As soon as the temperature drops below 55 °C, the output will automatically increase again.

Intelligent power reduction - The headlamp has a built-in protection circuit. When the reflector gets closer to the illuminated object (less than 60 mm) for more than 1s, it will automatically reduce the power to low mode to prevent the object from being damaged by strong light and glare from reflected light. When the reflector is far from the illuminated object, the headlamp automatically restores the previously used power level. Turn on/off the smart proximity sensor - press the side button for 6 seconds when the headlamp is turned off. Turning on the function is indicated by the headlamp with two flashes in low mode. Deactivation of the headlamp function is indicated by eight flashes in low mode.

Warning

• Do not disassemble the sealed parts yourself, this will void the warranty.
• If the headlamp flashes, does not switch to higher power modes, or does not light up, it may be for one of the following reasons:
  
  • The battery is dead - charge it.
  • Make sure the connector on the cable between the headlamp and the battery case is firmly connected.

Warranty

Five-year warranty for the headlamp and 2 years for the battery.

Afterlight: 450m
Max. durability: 500 hours
Output: 4000lm
Number of modes: 12
Weight: 433g
Power: External battery
Light source: Cree XP-G3
Light source: Cree XHP70
Light source: Cree XHP50
Light source: Luminus SST-20
Waterproof: IP66 (heavy rain)
Color: black