Climbing Technology Click Up safety pin, Ocher
Features
CLICK UP is a semi-automatic safety device that works without the need to operate any lever or moving parts.Simple feeding and picking up of the rope, both hands work with the rope.
The rope in the belay is immediately automatically blocked by the HMS carabiner at the moment the climber falls. This allows the belayer to catch the fall easily - it is only necessary to control the free end of the rope. At this moment, the HMS carabiner "CLICK-ne" into the self-locking position.
It allows the belay to easily lower the co-climber to the ground - just apply moderate pressure from the top of the belay while keeping the free end of the rope under control.
In the event that you need to belay again after the first climber has fallen or dismounted, you can unblock the belay easier by moving it "UP" away from you, thus returning the carabiner to the basic belay position (the rope must not be loaded at this moment).
If it happens that the first climber pulls hard on the rope to get enough of it and click it into the expressway, it may happen that the braking HMS carabiner "CLICK-ne" into the self-locking position. In this case, you simply push CLICK UP away from you with one hand and the HMS carabiner will return to the non-braking position and the climber can continue picking up the rope. Of course, even during this operation, the climber is safely secured.
CLICK UP is the only belay on the market that catches the fall of the climber even if the rope is inserted the other way around! In this case, CLICK UP does not work as a semi-automatic safety device, but as a classic safety bucket thanks to the V-shaped grooves to increase the braking effect.
To be used exclusively with the HMS carabiner CONCEPT SGL HC
The CLICK UP is supplied and must be used together with the specific HMS carabiner CONCEPT SGL HC with wear-resistant anodizing and the ACL system (steel spring preventing the carabiner from turning over), which prevents the possibility of the carabiner turning and possible overloading of its secondary axis.Features of the carabiner:
- Prominent double T profile for excellent weight/strength ratio.
- Lightened and shaped for a better grip.
- The nose of the carabiner does not have a beak, so that it does not get caught when clicking and unclicking.
- ACL system - a steel spring that allows the carabiner to be attached to the safety eye of the seat, which fixes its position and thus prevents cross-overloading of the carabiner.
Carabiner parameters:
Longitudinal load capacity (main axis): 23 kN
Lateral load capacity (secondary axis): 10 kN
Longitudinal load capacity when the lock is open: 7 kN
Weight: 77 g
Size: 105x73 mm
Lock clearance: 21 mm
ACL
Carbine certification and legislation:
EN 12275:2013-H
EN 362:2004-A/T
CE 0333
UIAA
Individually tested 100%
Made in Italy
Sport | alpinism, climbing, via ferrata |
product ID | 226683 |

There are currently no reviews