Fenix WT25R LED light

Fenix ​​WT25R is a universal rechargeable work lamp with a unique articulated construction with a tilting reflector, in which a Cree XP-L HI LED is installed with a luminous flux of up to 1000 lumens and an afterglow of up to 220 meters (ANSI). The head tilts in the range of 105 degrees and thus guarantees maximum versatility. The Fenix ​​WT25R lamp is also equipped with a strong steel clip for easy wearing on a belt or work clothes and also with a magnetic end, thanks to which the light can be easily attached to anything iron. Its variability makes the lamp particularly useful for work use, camping, movement in nature and many other activities.

The lamp is powered by an 18650 lithium-ion battery with a capacity of 3400 mAh, which is included in the package and is charged with a USB cable with a magnetic end directly in the lamp. The Fenix ​​WT25R has six lighting levels, including a strobe and an SOS signal, which allows users to choose a suitable compromise between lighting intensity and operating time. Despite all its functionality, the lamp retains minimal dimensions and a low weight of 137 grams including the battery.

All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters of the Fenix ​​WT25R LED work light

• A powerful Cree XP-L HI LED with a lifetime of 50,000 hours of light is used.
• Six performance modes:
  
  • Constant lighting modes: 1000 lumens (3.66 hours) -> 400 lumens (4.83 hours) -> 150 lumens (11 hours) -> 50 lumens ( 29 hours ).
  • Flash modes: strobe (1000 lumens) -> SOS signal (50 lumens).
• Digitally regulated for constant brightness, the electronics remember the last set mode.
• It uses one Fenix ​​18650 lithium-ion battery with a capacity of 3400 mAh.
• Indication of the state of charge of the accumulator.
• Charging via the magnetic connector on the lamp.
• Textured reflector for a light cone with an afterglow of 220 meters (11905 cd).
• Made of hardened aircraft aluminum and impact resistant plastic.
• Metal parts treated with hard anodizing type HA-III.
• Dimensions 13.53 cm (length) x 2.94 cm (width) x 2.41 cm (height).
• Weight 137 grams (including battery).
• Electronics with protection against reverse battery insertion.
• Impact-resistant from a fall from a height of 1 meter.
• Waterproof according to the IP66 standard.
• Magnetic end - the lamp can be attached to anything iron.
• Hardened ultra clear glass lens with anti-reflective coating.
• Able to stand independently on a flat place, the head can be tilted within a range of 105° in a few steps.
• The package includes a flashlight with a Fenix ​​18650 3400 mAh rechargeable battery, a USB cable with a magnetic end, a wrist strap, and a spare o-ring.
• The lamp can also be purchased with a USB adapter for the mains and a USB adapter for the car.

Use of Fenix ​​WT25R LED lamp

The flashlight is turned on and off by holding the button for 0.5 seconds, and once it is on, the lighting modes are switched by pressing it briefly. To switch to stroboscope, hold the button for 1.2 seconds, press the button again briefly to turn on the SOS signal. The lamp remembers the last selected lighting mode (except flash modes).

The control button can be locked so that it does not turn on by itself, e.g. when transported in luggage - press the control button twice quickly (within 0.5 seconds), the light will then flash twice, signaling locking. To unlock, quickly press the button twice again.

Protection against overheating: due to the fact that the lamp reaches a high output of 1000 lumens, the temperature rises in the highest mode during prolonged lighting. If the temperature exceeds 60 °C, the power will be automatically reduced. As soon as the temperature drops below 60 °C, it is possible to use the highest power again.

Charging: plug the charging cable into the USB connector of the computer, the USB adapter in the network or in the car. Attach the cable to the charging pad on the lamp, it will attach itself using magnets. During charging, the indicator light on the cable lights up red, after charging is complete it lights up green. Charging a fully discharged Fenix ​​ARB-L18-3400 battery takes approximately 4.5 hours.

Charge status indication (only works with the original battery): After a short press of the button (the lamp must be switched off), the LED indicator of the battery charge status in the button is activated. Four lit LEDs mean the battery is more than 80% charged, three lit 60-80%, two 40-60%, one 20-40% and one flashing means the battery is less than 20% charged.

Notice:

• Do not disassemble the sealed part in the lamp head yourself, this will void the warranty.
• If the protective rubber rings appear damaged after a long period of use, replace them. The rings must also be lubricated to prevent rubber erosion. By following these rules, the lamp will be properly protected against water.
• If the lamp flashes or does not light up, it may be for one of the following reasons:
  
  • The battery is dead, charge it.
  • The contacts inside the light are dirty - clean them with a cotton swab dipped in alcohol.

Warranty:

Five-year warranty for the lamp, two years for the battery.

Max power: 1000 lm
Max endurance: 29 hours
Weight: 137 g
Number of modes: 6
Afterlight: 220 m
Power supply: 1x 18650
Power supply: USB charging
Light source: Cree XP-L HI
Waterproof: IP66 (heavy rain)