Fenix ​​TK11R rechargeable lamp, 1600 lm

Fenix ​​TK11R is a rechargeable tactical light with simple control with the possibility of quick activation of the stroboscope and a power of up to 1600 lumens. It is equipped with a top LED Luminus SFT-40, thanks to which it shines up to a distance of 420 meters. The lamp uses a dual tactical switch, which enables faster and more reliable control in crisis situations. The head of the lamp is equipped with a striking rim, so it can be used to break through glass or for self-defense. The robust design allows the lamp to be used on long weapons, so it is suitable for professionals, armed forces and hunting. The lamp is powered by one high-capacity Li-ion 18650 3400 mAh battery (included in the package), which is charged directly in the lamp via a modern USB-C connector and supplies energy for up to 25.5 hours of lighting, or in an emergency from two disposable CR123A batteries. The solid and waterproof design predestines this tactical light primarily for harsh outdoor conditions and for use in security forces, search, rescue operations and hunting.

All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix ​​TK11R lamp parameters

• A powerful Luminus SFT-40 LED with a lifespan of 50,000 hours is used.
• Six power modes: 1600 lumens (1.8 hours) -> 350 lumens (4.2 hours) -> 30 lumens ( 25.5 hours ) -> strobe 1600 lm with variable frequency.
• Endurance times are measured with a rechargeable Li-ion battery type 18650 with a capacity of 3400 mAh (included in the package).
• Alternatively, two 3V CR123A lithium batteries can be used for power supply.
• The USB-C charging port is hidden under a rubber cap on the body of the lamp.
• Battery charge indication.
• Highly efficient smooth reflector for a light cone with an afterglow of up to 420 meters (45000 cd).
• Intelligent protection against overheating, low battery warning.
• Dimensions 14.55 cm (length) x 3.4 cm (head diameter) x 2.35 cm (body diameter).
• Weight 117.5 grams (without battery), 166.5 grams (incl. akumulátora).
• Durable body construction made of aircraft-grade hardened aluminum.
• Durable hard-to-scratch surface - Type III hard anodized.
• Impact-resistant from a fall from a height of 1 meter.
• Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 30 minutes).
• Hardened ultra clear glass lens with anti-reflective coating.
• Dual tactical switch on the end of the lamp (instant on/off function by holding, instant strobe).
• Trapezoidal threads highly resistant to wear.
• The lamp comes with a battery, a wrist strap, a USB-C charging cable, a spare o-ring and a belt pouch.
• Optional accessories can be purchased: AER-02 cable switch, AOT-M traffic cone, AOF-M red filter and AOD-M diffuser.
• The following accessories are also compatible with the light: ALG-15 quick-release rail mount, ALG-00 quick-release rail mount, Fenix ​​ALG-16 M-LOK mount, Fenix ​​ALG-18 barrel mount, barrel mount, metal magnetic mount on barrel, plastic magnetic barrel mount, light mount on optics, metal mount on optics, Fenix ​​ALD-05 strap for helmet light use, FB-1 bike mount, Fenix ​​bike mount.
• The lamp can also be purchased with a USB adapter for the mains and a USB adapter for the car.

Use of the TK11R lamp

From the factory, there may be an insulating cap inside the lamp on the battery. Remove it from the battery before first use.

To turn on/off, press the larger tactical button located at the end of the light, for immediate activation, hold the button. By pressing the secondary switch button, you can switch between power modes at any time during operation. To switch to flash mode, hold down the switch button for approximately 0.5 seconds while the light is on. Press and hold the toggle button to turn the light directly into strobe mode.

Intelligent protection against overheating - due to the fact that the lamp achieves a high power, there is an increase in temperature. If the temperature exceeds 65°C, the power will be automatically reduced. As soon as the temperature drops below 65°C, it is possible to use the highest power again.

Battery charge status indication - the lamp always indicates the battery charge status three seconds after switching on. Green indicates a sufficient state of charge (100% - 85%), green flashing 85% - 50%, steady red 50% - 25% and flashing red a critically discharged battery (25% - 1%). If the battery is discharged, the lamp will gradually automatically switch to lower power modes.

Charging - unfold the rubber cover of the charging connector on the side of the lamp and plug in the attached cable (USB-C connector), plug the other end of the cable into the computer, or the USB adapter into the electrical network or the car. The side indicator lights up red while charging. It lights up green when fully charged. Charging a fully discharged battery takes about 3.5 hours. The lamp cannot be used while charging.

Warning

• Use only high-quality 18650 type rechargeable batteries with protective electronics.
• Insert the batteries with the positive pole towards the lamp head.
• If the protective rubber rings appear damaged after a long period of use, replace them. The rings must also be lubricated to prevent rubber erosion. By following these rules, the lamp will be properly protected against water.
• If the light flickers, does not switch to higher power modes, or does not light up, it may be for one of the following reasons:
  
  • The battery is discharged - charge it or replace it.
  • The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.
  • The head, body or back of the lamp is loose, tighten them.

Output: 1600lm
Max. duration: 25.5 hours
Aftersight: 420m
Number of modes: 4
Weight: 167g
Power supply: 1x 18650
Power supply: 2x CR123A
Light source: Luminus SFT-40
Waterproof: IP68 (immersion 2 m)