SEAM GRIP+WP is a polyurethane-based adhesive for repairing light and membrane fabrics. From the SEAM GRIP / AQUASURE group, it has the lowest viscosity and creates a thin layer of PU rubber that is self-supporting, flexible and flexible. The glue is perfectly waterproof. It enables gluing without patches, blunt gluing and also the reconstruction of missing material in a hole with a diameter of up to 20 mm.
Instructions for use: Apply directly from the tube, hardens within 2 hours, polymerizes to full structural strength in 12-24 hours. CURE ACCELERATOR can be used as an accelerator. An environment with high relative humidity (90-100%) at temperatures above 20 °C significantly accelerates polymerization.
Safety information: Contains xylene, 4,4-methylenediphenyl diisocyanate, tosyl diisocyanate.
Flammable liquid and vapors. It irritates the skin. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. May cause organ damage through prolonged or repeated exposure. If medical attention is needed, have the product packaging or label at hand. Keep out of reach of children. Protect from heat, hot surfaces, sparks, open flames and other sources of ignition, do not smoke. Use only outdoors or in well-ventilated areas. IF INHALED: Move the person to fresh air and keep him in a position that facilitates breathing. In case of breathing difficulties: call a TOXICOLOGICAL INFORMATION CENTER/physician. In case of fire: Use water spray, powder extinguisher, foam, carbon dioxide to extinguish. Dispose of contents/packaging in accordance with hazardous waste regulations.
Sport | hiking, cross-country skiing, running, ski mountaineering, alpine skiing, trail running, alpinism, climbing, via ferrata, canyoning |
product ID | 300814 |

There are currently no reviews