GEAR AID GA AQUASURE +FD glue, 28 g

AQUASURE+FD is a polyurethane-based adhesive/putty for the repair of medium-weight fabrics (Cordura) and neoprene. From the SEAM GRIP / AQUASURE group, it has a medium viscosity, creates a 1 mm thick layer of PU rubber that is self-supporting, flexible and flexible. The glue is perfectly waterproof. It enables gluing without patches, blunt gluing and also the reconstruction of missing material in a hole up to 20 mm in diameter. When gluing inflatable boats and mattresses (pressure cylinders), overlapping with a patch is necessary from a strength point of view. AQUASURE+FD is suitable for gluing damaged self-inflating mattresses without patches.

Instructions for use: Apply directly from the tube, hardens within 2 hours, polymerizes to full structural strength in 12-24 hours. CURE ACCELERATOR can be used as an accelerator. At temperatures above 20°C, an environment with high relative humidity (90-100%) significantly accelerates polymerization.

Safety information: Contains xylene, 4,4-methylenediphenyl diisocyanate, tosyl diisocyanate.
Flammable liquid and vapors. It irritates the skin. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. May cause organ damage through prolonged or repeated exposure. If medical attention is needed, have the product packaging or label at hand. Keep out of reach of children. Protect from heat, hot surfaces, sparks, open flames and other sources of ignition, do not smoke. Use only outdoors or in well-ventilated areas. IF INHALED: Move the person to fresh air and keep him in a position that facilitates breathing. In case of breathing difficulties: call a TOXICOLOGICAL INFORMATION CENTER/physician. In case of fire: Use water spray, powder extinguisher, foam, carbon dioxide to extinguish. Dispose of contents/packaging in accordance with hazardous waste regulations.