Fenix PD32 V2.0 LED flashlight
The sixth generation Fenix PD32 V2.0 flashlight offers a luminous flux of up to 1200 lumens (ANSI) and a respectable afterglow of up to 395 meters. Super-standard afterglow (regarding the size of the lamp) was achieved by using the top OSRAM KW CSLPM1.TG LED, which creates a very well-focused cone of light. The lamp can be powered by two disposable CR123A batteries or one high-capacity li-ion 18650 battery (not included in the package). Fenix PD32 V2.0 has four different lighting modes that allow you to choose between high power, long endurance ( up to 82 hours ) and flash mode for attracting attention and crisis situations. The strobe can be quickly activated from the off state by holding down the tactical button for half a second. The PD32 V2.0 impresses not only with its compact size and great performance, but also with the possibility of attaching the Fenix AER-02 V2.0 cable switch. We can therefore recommend it for use in security components as well as ordinary outdoor and hunting use.
All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.
Fenix PD32 V2.0 flashlight parameters:
- The latest version of the powerful OSRAM KW CSLPM1.TG LED with a lifespan of 50,000 hours is used.
- Four modes in total:
- lighting modes: 1200 lumens (2.66 hours) -> 350 lumens (5.3 hours) -> 30 lumens ( 82 hours ) -> strobe (1200 lumens).
- Smooth parabolic reflector for a light cone with an afterglow of 395 meters (39,000 cd).
- Endurance times are measured with a rechargeable 18650 li-ion battery with a capacity of 3500mAh.
- Digitally regulated for constant brightness.
- Two 3V single-use CR123A batteries or 1 x 18650 rechargeable li-ion battery can be used for power supply.
- Due to the mechanical protection against polarity reversal, the accumulators must have the positive pole exposed. Older Fenix batteries with a flat plus pole cannot therefore be used.
- The lamp can be used on a long gun with suitable mounting.
- Dimensions 12.94 cm (length) x 2.54 cm (reflector diameter) x 2.36 cm (body diameter).
- Weight 82 grams (without batteries).
- Made of aviation hardened aluminum, durable surface - Type III HA.
- Impact-resistant from a fall from a height of 1 meter.
- The lamp has a memory and will always turn on in the last set mode (does not apply to flash modes).
- Trapezoidal threads with increased wear resistance.
- Significant surface grooves for better grip, the design prevents the lamp from rotating on an uneven surface.
- Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 30 minutes).
- Detachable steel buckle with black finish.
- Hardened ultra clear glass lens with anti-reflective coating.
- Tactical switch at the end of the light (momentary on / off function).
- A wrist lanyard, a belt pouch and a spare o-ring are included with the lamp.
- Batteries are not included in the package.
- Optional accessories can be purchased, for example: cable switch AER-02 V2.0, holder ALG-05 for remote switch, red filter AOF-S+, green filter AOF-S+, blue filter AOF-S+, diffuser AOD-S, quick-clamp mounting on ALG-15 gun rail, ALG-00 gun rail mount, bike mount, ALP-10S holster, Fenix ALD-05 helmet strap, BikeBlock bike helmet mount, Fenix bike mount, or metal magnetic mount on barrel or plastic magnetic barrel mount.
The use:
To turn it on, press the tactical button at the end of the lamp, for immediate activation, hold the button. The lamp remembers the last selected mode (except stroboscope). Lighting modes (except stroboscope) can be changed cyclically by pressing the button. To activate the strobe, hold the button fully pressed for 0.5 seconds (it works the same from the off state). A light press will return the lamp to its original mode. Press the button to turn off the lamp.
Intelligent protection against overheating - due to the fact that the lamp reaches a high output of 1600 lumens, its temperature increases. If the temperature exceeds 60°C, the output will be automatically reduced to approx. 500 lumens. As soon as the temperature drops below 60°C, it is possible to use the highest power again.
Warning of dead batteries - the lamp will gradually automatically switch to the lowest mode and flash 3 times every five minutes.
Notice:
- Do not disassemble the sealed part in the lamp head yourself, this will void the warranty.
- Use only high-quality 3V CR123A batteries and 18650 li-ion batteries to avoid damaging the lamp.
- If the protective rubber rings appear damaged after a long period of use, replace them. The rings must also be lubricated to prevent rubber erosion. By following these rules, the lamp will be properly protected against water.
- If the light flickers, does not switch to higher power modes, or does not light up, it may be for one of the following reasons:
- Batteries are almost empty - replace them.
- The contacts inside the lamp are clogged - clean them with a cotton swab dipped in alcohol.
- The head, body or back of the lamp is loose - add lubricant to the sealing rings and tighten the head and the end of the lamp.
Warranty: five years
Max endurance: 82 hours
Weight: 82g
Number of modes: 4
Aftersight: 395m
Power: 1200lm
Power supply: 1x 18650
Power supply: 2x CR123A
Light source: OSRAM KW CSLPM1.TG
Waterproof: IP68 (immersion 2 m)
Sport | hiking, camping |
Colour | black |
Power supply type | none |
Battery type | battery powered |
product ID | 131840 |
comment Reviews