Fenix BC06R rechargeable rear flasher
The rechargeable
Fenix BC06R red flasher brings two power levels -
10 and 30 lumens plus a
brake light mode - 90 lumens. In both power levels, it has the function of
fast flashing, slow flashing and constant lighting, in the lower level it also offers
rotating lighting. Power is provided by a built-in lithium-polymer battery with a capacity of 560 mAh, which is charged via the USB-C connector directly in the lamp.
The design of the attachment allows quick assembly and disassembly of the bicycle light without the use of tools. The sleeve fits a seat tube with a diameter of
25.4 to 31.6 mm. The package also includes a holder that can be used to attach the flasher to
the underseat skids (the distance between the skids must be between
39 and 50 mm ).
In fast flashing mode with a power of 10 lumens, it lasts up to
24.5 hours. Fenix BC06R will provide you with safe lighting for night training, regular commuting to work and endurance races.
All lamp parameters (luminous flux, battery operation time, waterproofing and afterglow) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.
A total of
seven power modes:
30 lm (5.5 h) -> slow flashing 30 lm (5.5 h) -> fast flashing 30 lm (
8 h ) -> 10 lm (12.5 h) -> slow flashing 10 lm (14.5 h) - > fast flashing 10 lm (
24.5 h ) -> rotating light 10 lm (22 h).
It is possible to purchase a USB adapter for the mains and a USB adapter for the car, a USB adapter supporting fast charging and a colored USB-C cable.
Using a bicycle light
To
turn it on or off, hold down the button on the lamp for about 0.5 seconds. The lamp is always switched on in the last used mode, with the exception of the brake light 90 lm. You can switch power modes at any time during operation by briefly pressing the button (they are cyclically switched in the order low 10 lm - slow flashing 10 lm - fast flashing 10 lm - high 30 lm - slow flashing 30 lm - fast flashing 30 lm - rotating light 10 lm).
Brake light function - if there is a sudden change in speed when the light is on, the lamp automatically activates the 90 lumen brake light. After two seconds, the light will automatically return to the previous lighting mode.
Battery capacity indication - with the lamp off, press the button briefly once, then the backlight of the button lights up for five seconds. Steady green light means the battery is more than 85% charged, green flashing means a charge of about 50-85%, red light means a charge of about 25-50% and red flashing means the battery is almost empty (less than 25%).
Low battery warning - if the battery voltage drops below 3.0 V, the lamp will reduce the brightness to a lower level and the LED indicator in the button will start flashing red to remind you of the need to recharge.
Charging
- Unfold the rubber cover of the USB-C connector on the back of the lamp and use the included cable to connect it to a computer, power bank, network USB adapter or USB car adapter. Any mobile phone charger with a USB-C connector can also be used for charging.
- While charging, the button lights up red, after full charge it lights up green.
- Charging time is approx. 1.5 hours. The used Li-pol battery does not suffer from a memory effect, so the lamp can be recharged at any time.
- After charging and removing the power cable, do not forget to seal the cover of the USB connector.
Warning
- Do not disassemble the sealed parts yourself, this will void the warranty.
- If the flashlight does not switch to a higher mode or does not light up, it may be because the battery is discharged - charge it.
