Fenix CL30R portable flashlight rechargeable

The Fenix ​​CL30R is an extremely powerful rechargeable lamp that you can use to illuminate a room, campsite, tent or work table. Highly bright diodes hidden under the cylindrical diffuser provide a luminous flux of up to 650 lumens ( ANSI) with a neutral shade of white light and a lifespan of up to 300 hours. The CL30R is powered by three 18650 li-ion batteries with a capacity of 2600 mAh (included in the package), which are charged directly in the lantern using a micro-USB connector. In case of emergency, the lamp can be powered by only one or two accumulators (lighting time is proportionally reduced) or six disposable CR123A batteries. The lantern offers a total of six lighting modes and is equipped with a charge status indicator. The lantern is also equipped with a USB output, so it can also be used as a POWERBANK for charging a mobile phone and other USB devices.

Thanks to the durable and impact-resistant construction with IPX-7 coverage, the lantern is waterproof to a depth of 1 meter. The upper side of the lantern is equipped with a hanging eye for hanging. The mounting options are further expanded by the thread on the tripod, which is on the underside of the lantern.

All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix ​​CL30R lantern parameters:

• The light source is highly bright SMD diodes with a neutral shade of light.

• Six performance modes:

  • measured with the included Li-ion 18650 battery with a capacity of 2600 mAh: 650 lumens: (4.5 hours) -> 350 lumens (9 hours) -> 100 lumens (38 hours) -> 50 lumens (70 hours) -> 10 lumens (300 hours) -> flashing 100 lumens (70 hours).

  • Measured with Li-ion battery 18650 with a capacity of 3500 mAh: 650 lumens: (6 hours) -> 350 lumens (12 hours) -> 100 lumens (51 hours) -> 50 lumens (93 hours) -> 10 lumens (400 hours ) -> flashing 100 lumens (93 hours).

• Digitally regulated for constant brightness.

• Three 18650 batteries with a capacity of 2600 mAh are already included in the package, 18650 batteries with a raised plus pole can be used as replacements (batteries with a flat flat-top plus pole are not compatible). In case of emergency, the lamp can be powered by only one or two accumulators (the lighting time will be reduced proportionally), six disposable CR123A batteries can also be used.

• Charging via micro-USB connector. USB output 5 V for charging mobile phones, GPS navigation and other USB devices.

• The batteries are well insulated against low temperatures, so the lamp can be used even at temperatures well below zero.

• Protection against accidental insertion of batteries in reverse (reverse polarity).

• The lantern has a memory and will always turn on in the last set mode (does not apply to flashing).

• Made of aluminum alloy and durable plastic, the lantern is shockproof against drops from a height of 1 meter.

• Waterproof according to the IPX-7 standard (immersion to a depth of 1 m for 30 minutes). The lantern floats on water, so you won't drown it.

• The omnidirectional diffuser creates a wide uniform light cone with a range of up to 35 meters.

• The upper side is equipped with a hanging eye, the lower side is threaded for mounting on a tripod.

• Dimensions 9.3 cm (diameter) x 13.6 cm (height). Weight 556 grams including batteries, 412 grams without batteries.

• The package includes a lantern, three Fenix ​​18650 2600 mAh batteries, a spare o-ring and a USB cable.

The use:

From the factory, there may be a black insulating cap inside the lantern on the batteries, remove it before the first use. To turn on or off, hold down the side button for about 1 second. Five levels of power are switched by pressing it, flashing is activated by pressing the button twice quickly.

Battery capacity indication - when the lantern is off, briefly press the button to activate the four status LEDs on the top side. The number of lit diodes indicates the approximate level of battery charge (less than 35%, 36-60%, 61-85%, more than 85%). When the batteries are almost empty, the lantern automatically switches to lower power modes and the status LED starts flashing.

Charging - before charging the lantern , unfold the rubber cover of the micro-USB connector. Connect it using the included USB cable to a computer, USB network adapter or USB car adapter. A standard mobile phone charger with a micro-USB connector can also be used for charging. During charging, the four status LEDs on the top side blink, after full charge they all light up permanently.

Accumulators do not suffer from a memory effect, so they can be recharged at any time and there is no need to wait until they are discharged. Charging fully discharged batteries takes about 8.5 hours (depending on the power of the charging source used). While charging, you can only shine with the lantern in 100 lumens mode.

To power external USB devices (power bank function), plug the cable into the USB connector of the lantern.

Notice:

• Do not disassemble the sealed parts of the lamp yourself, this will void the warranty.

• When using disposable CR123A batteries, do not try to charge them in the lamp.

• Never mix different types and capacities of batteries in the lantern.

• If the lamp flashes or does not light up, then it means that the batteries are discharged. Nabite ich.

Warranty:

Five-year warranty for the lamp, two-year warranty for the battery.

Max output: 650lm
Max endurance: 300 hours
Afterlight: 35m
Number of modes: 6
Weight: 556g
Power supply: 2x 18650
Power supply: 1x 18650
Power supply: 6x CR123A
Power supply: 3x 18650
Light source: SMD diodes
Waterproof: IPX7 (immersion 1 m)