Shop Electronics and lights Lights Front Fenix BC30 V2.0 front light

Add to list

Fenix BC30 V2.0 front light

Name: Fenix BC30 V2.0 front light
Price: 92.9 EUR
Availability: InStock
Rating: 4.8 (68 reviews)

92.90 €

Found a better price?

Availability

Other product variants

Fenix BC30 V2.0 rechargeable front light + charging USB set with batteries

Rating (68)

Show all reviews

4,8/5

Product description

Fenix BC30 V2.0 front light

The second generation of the extremely powerful Fenix BC30 V2.0 bike light delivers a luminous flux of up to 2200 lumens (ANSI). For power supply, it is possible to use a pair of rechargeable Li-ion batteries 18650 with the positive pole exposed (18650 without the positive pole exposed in the lamp have insufficient contact), or four disposable CR123A batteries.

The light source is two modern Luminus SST-40 LEDs. The lamp uses the proven technology of double direction of light 'Dual Distance Beam System'. The main cone of light is created by specially designed optics and shines up to a distance of 187 meters, while the secondary wide cone of rays completes the optical element, which is shaped in the upper part in such a way that the light directed upwards refracts down to the ground. This creates a cone that continuously illuminates the entire space in front of the bicycle - even in places that normal bicycle lights cannot cover.

Compared to the previous generation, the bicycle light is equipped with a wireless remote control, which can be used to change lighting modes or activate Burst mode. The design of the holder allows quick assembly and disassembly of the light on the handlebars without the use of tools, the holder also allows quick removal of the lamp, so it can also be used as a high-performance hand light. The holder can be used for all handlebars with a diameter of 22 to 32 millimetres. There are a total of six digitally regulated power modes, including warning flashing, and there is also a warning about low batteries. The Fenix BC30 V2.0 bike light will provide you with high-quality lighting for night training, regular commuting to work and for 24-hour races.

Batteries are not included in the package.

All lamp parameters (luminous flux, battery operation time, waterproofing, and afterglow) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters of the Fenix BC30 V2.0 bicycle light

Two powerful Luminus SST-40 LEDs with a lifetime of 50,000 hours of light are used.
A total of six power modes: BURST 2200 lumens (after pressing the button, max. 30s) -> 1500 lumens (2.3 hours) -> 600 lumens (6 hours) -> 200 lumens (16 hours) -> 50 lumens (50 hours) -> warning flashing (pulsing between 50 and 600 lumens).
Endurance times are measured with rechargeable 18650 li-ion batteries with a capacity of 3500mAh.
Electronics with digital constant power regulation and low battery warning. Maximum supply voltage 12.8 V.
Two rechargeable 18650 Li-ion batteries or four disposable CR123/CR123A lithium batteries can be used for power. The batteries are placed inside the lamp.
Specially shaped optics create a light cone combining wide peripheral lighting with an afterglow of over 187 meters (8792 cd).
The lamp is attached to the holder using a quick-release mechanism, which allows you to take it off in an instant and put it back on safely just as quickly.
The rubberized design of the holder sleeve ensures a firm and secure attachment of the lamp to the bicycle with simple and reliable adjustment of the lighting direction.
The body of the lamp is made of aluminium alloy.
The lamp comes with a remote wireless switch that can be used to change lighting modes and activate Burst mode.
The wireless remote switch is powered by a CR1632 battery that lasts for approximately 360 hours of use.
Protection against overheating - if the lamp heats up above a safe limit, it will automatically switch to a lower power level.
Dimensions 12 cm x 5 cm x 3.18 cm.
Weight 154 grams (without batteries and holder).
Waterproof and dustproof according to the IP67 standard (tested underwater at a depth of 1 meter).
Package contents: lamp, handlebar holder with spacers (thin and thick), remote switch, CR1632 batteries (for remote switch), spare sealing ring.
The lamp can be purchased with a handlebar holder for a second bicycle, or a Fenix ALD-08 holder for a bicycle helmet or flat road aero handlebars.
Batteries are not included in the package.

Using the Fenix BC30 V2.0 bike light

To turn on or off, hold the button for about 0.5 seconds. The lamp is always switched on in the lowest mode, you can switch to other levels of power at any time during operation by pressing the button. To switch to flashing mode, press the button twice quickly. If the lamp is switched on, modes can also be switched with a remote wireless switch. Burst mode is activated by pressing the button with the lightning symbol, other lighting modes are switched with the second smaller button. The lamp can be turned off by holding down the smaller button for 0.5 seconds.
Before using the wireless remote switch for the first time, it must be paired with the lamp: Hold down the control button on the lamp for 5 seconds.

The button will then flash alternately green and red, and the lamp will go out. Then press any button on the remote control and the lamp will light up again as an indicator of successful pairing. The distance between the lamp and the controller should not be longer than 1.5 meters during pairing. This process only needs to be performed once, the controller and the lamp are then permanently paired.

Battery level Indication

With the light switched off, single click the functional switch to check the battery status. The battery status percentage on this bright bike light will be displayed, and then goes out in 3 seconds.

Green light constant on (saturated): 100% - 80%
Orange light constant on (sufficient): 80% - 40%
Red light constant on (poor): 40% - 10%
Red light flashes: 10% - 0%

If the button already flashes red, the lamp automatically switches the power to lower modes to ensure the longest possible endurance. In this case, we recommend replacing the batteries with charged ones as soon as possible, in order to prevent the protection electronics built into the batteries from being switched off and thus from going out. The indication can be turned on even when the lamp is off, just briefly press the control button and then the indicator LED lights up for three seconds. Note: the low battery indicator is adapted to the 18650 battery for proper function, it may not signal correctly when using disposable CR123A cells.

Battery Replacement

Rotate the tail cap button according to the direction of the "OPEN" logo, and pull out the battery case.
Insert the battery according to the polarity markings of the battery compartment.
Insert the battery case into the light body, and after the battery case is flush with the light body, rotate the tail cap button in the opposite direction of the "OPEN" logo.

Replacement of remote control batteries

Using a coin, open the back cover of the remote switch by turning it counter-clockwise.
Replace the CR1632 battery. Pay attention to the correct polarity.
Close and secure the back cover with a coin by turning it clockwise.
The battery in the remote switch lasts approximately 360 hours of use.

Warning

Do not disassemble the sealed parts of the lamp yourself, this will void the warranty.
If the power button is red and cannot be switched to high power modes, then the batteries are dead and need to be replaced.
If the lamp flashes or does not light up, it may be for one of the following reasons:
- Batteries are dead - replace them.
- The contacts on the connectors are dirty. Clean them with a cotton swab dipped in alcohol.

Warranty

Five-year warranty.
Aftersight : 187m
Max runtime: 50 hours
Max output: 2200lm
Number of modes: 6
Weight: 154g
Power supply: 4x CR123A
Power supply: 2x 18650
Light source: Luminus SST-40
Waterproof: IP67 (immersion 1 m)

Product features

A total of six power modes: BURST 2200 lm (after pressing the button, max. 30 s) -> 1500 lm (2.3 h) -> 600 lm (6 h) -> 200 lm (16 h) -> 50 lm (50 h) -> warning flashing (pulsing between 50 and 600 lm)
Runtimes are measured with rechargeable 18650 li-ion batteries with a capacity of 3500 mAh.
The light source is two modern Luminus SST-40 LEDs with a lifetime of 50,000 hours of light
Electronics with digital constant power regulation and low battery warning
The design of the holder allows quick assembly and disassembly of the light on the handlebars without the use of tools, the holder also allows quick removal of the lamp, so it can also be used as a high-performance hand light
The rubberized design of the holder sleeve ensures a firm and safe attachment of the lamp to the bicycle with simple and reliable adjustment of the lighting direction
The holder can be used for all handlebars with a diameter of 22 to 32 millimeters
Protection against overheating - if the lamp heats up above a safe limit, it will automatically switch to a lower power level
The body of the lamp is made of aluminum alloy
All lamp parameters (luminous flux, battery operation time, waterproofing and afterglow) are measured in accordance with the ANSI/NEMA FL 1-2009 standard

Product details

Power supply type	micro USB
Battery type	rechargeable
Max. luminous flux	1000 lm and more
Light purpose	see
Reach	187 m
Max. operating time	50 h
Max. power	2200 lm
Number of modes	6
Weight	154 g (without batteries and holder)
Power supply	4x CR123A
Light source	Luminus SST-40
Waterproof	IP67 (immersion 1 m)
Dimensions	12 cm x 5 cm x 3.18 cm
Package contents	light, handlebar mount with spacers (thin and thick), remote switch, CR1632 batteries (for remote switch), spare sealing ring
Maximum supply voltage	12.8 V
product ID	104366

Reviews

Product rating (68 ratings)

4,8/5

(68 ratings)

(61 ratings)

(6 ratings)

(1 rating)

(0 ratings)

How do you rate the product?

Add a review

Help others, earn points and shop better prices thanks to the loyalty system

Reviews

Sort by:

Add rating

Product question

Sort by:

Add product question

Front bike lights from Fenix

Fenix is a recognized brand in the field of lighting, known for their high-quality and reliable products. Founded in 2004, Fenix has built a solid reputation for manufacturing a wide range of flashlights, headlamps, lights, and other lighting solutions for a variety of outdoor, tactical and everyday uses. With their commitment to innovation, durability and reliability, Fenix has become a trusted name in the lighting industry.

Manufacturer contact information