WINORA Tria 8 28 electric bike, deepsea
WINORA Tria 8 28 electric bike
Drive |
Bosch, Active Plus, 250 Wh, 50 Nm, 25 km/h
|
Battery |
Bosch, PowerTube, 400 Wh
|
Frame |
Winora, Aluminum 6061, GCOPD, THT, Aluminum 6061
|
Fork |
SR Suntour, NEX E25, Steel spring, 63 mm travel, Steel steerer tube 1 1/8" - 1 1/2" tapered, Quick release 100 mm
|
Shifting |
Shimano, Altus M315, Rapidfire
|
Derailleur |
Shimano, Acera M360
|
Cassette |
SunRace, CSM40, 11-34T
|
Chain |
KMC, X8
|
Cranks |
Winora, forged, Aluminum
|
Converter |
Samox, 38T
|
Brakes |
Alhonga, HT474, Hydraulic disc brakes
|
Brake levers |
Alhonga, HT474, Aluminum
|
Rims |
Ryde, Eco21, With Eyelets, Double Wall, Aluminum
|
Hubs |
aluminum mushroom
|
Spokes |
Stainless spokes
|
Tires |
Schwalbe, Road Cruiser, 50-622, 28 x 2.0 inch
|
Seat post |
XLC, Aluminum, Patent, 31.6 mm
|
Saddle |
Selle Royal, Wave
|
Stem |
Aluminium, angle adjustable, A-head, 31.8 mm
|
Handlebars |
Ergobar, oversize, 640 mm
|
Grips |
XLC, Comfort bo3
|
Headset |
Feimin, A-Head Tapered, Ball bearing
|
Pedals |
VP, E461, Aluminum, with Reflector
|
Mudguards |
Eurofender, Tempo, Chromoplastics
|
Display |
Bosch, Intuvia
|
Chain guide |
SKS, Chainbow-E 38T
|
Disc brake rotors |
Alhonga, DXR1806, 180 mm, Alhonga, DXR1606, 160 mm
|
Front light |
Herrmans, H-Black MR-GO
|
Rear light |
AXA, Juno Ebike
|
Pannier rack |
system carrier, 25 kg capacity
|
Kick stand |
Ursus, Mooi, Rear stand
|
Sex | Men, Women, Unisex |
Model year | 2022 |
Gears | 1x8 |
Groupset | Shimano Acera, Shimano Altus |
Colour | deepsea |
Material | aluminium |
Wheel diameter | 28" |
Drive | Bosch Active Line |
Battery | 400 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
product ID | 173029 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews