Rock Machine Crossride INT e425 Touring 29 electric bike, gloss grey/black
Rock Machine Crossride INT e425 Touring 29 electric bike
Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, gravel and paved roads and during your weekend activities. If you ride more frequently, expect more regular fine-tuning.
Drive |
SPORT DRIVE middle engine MD250S
|
Battery |
SPORT DRIVE fully integrated downtube battery, 36 V, 500 Wh
|
Display |
SPORT DRIVE grip display 36 V
|
Frame |
Alloy Al-6061 T6 Custom tubing, Smooth Welding, Fun Ride Geometry, Sport Drive MID Motor, OLD 135x9, Disc Brake Post Mount, Fender&Kickstand Ready Dropout, Replaceable RD Hanger, Inner Cable Routing
|
Fork |
RST Blaze, 1-1/8", 80 mm travel
|
Shifting |
microSHIFT ACOLYTE SL-M7180-R, 8-speed
|
Derailleur |
microSHIFT Acolyte RD-M5185M
|
Cassette |
microSHIFT ACOLYTE CS-H083A, 12-42T
|
Chain |
KMC e8S
|
Cranks |
Wheel Top ED2L, 42T
|
Brakes |
Alhonga HJ-OD07, Hydraulic disc brake/Alhonga HJDXR 1606, 160 mm/160 mm
|
Rims |
WTB SX19, 32H
|
Front hub |
ONE1 KTMD7F, 32H, M9x100 mm, QR Type
|
Rear hub |
ONE1 KTK68R, 32H, M10x135 mm, CASSETE, QR Type
|
Spokes |
Sapim Galvanized Black
|
Tires |
WTB Riddler Comp, 29x1.75", Reflective Stripe
|
Seat post |
ONE1 Alloy, SP S405, 30.9 mm
|
Saddle |
WTB Volt Sport
|
Stem |
One1 MAS-D61808 Alloy, 31.8 mm, ±15°
|
Handlebars |
ONE1 Alloy, MTB AL-325BT, 6° upsweep, 9° backsweep, 25 mm rise, 680 mm, 31.8 mm
|
Grips |
Velo ERGO
|
Headset |
FSA Orbit 1.5E No.57B, Zero Stack, 1-1/8"x1.5"
|
Pedals |
Ball bearing, with sand non-slip inlay and reflector
|
Mudguards |
ALLOY FULL COVER FENDERS
|
Front light |
AXA Blueline 30
|
Rear light |
Spanning Pling XE
|
Pannier rack |
Alloy for AVS
|
Kick stand |
ATRAN VELO, Stylo HV
|
Lock |
AXA Block XXL
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x8 |
Groupset | microSHIFT Acolyte |
Size | M, L |
Colour | gloss grey/black |
Material | aluminium |
Wheel diameter | 29" |
Drive | BFI Sport Drive |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 80 mm |
product ID | 253354 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews