Rock Machine Crossride e400 Touring 29 electric bike, gloss metallic navy/silver
Rock Machine Crossride e400 Touring 28 electric bike
Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, gravel and paved roads and during your weekend activities. If you ride more frequently, expect more regular fine-tuning.
Drive |
Shimano STePS E5000, 40 Nm
|
Battery |
DARFON, 36 V, 504 Wh, integrated
|
Display |
Shimano SC-E5000, Clamp band
|
Frame |
Alloy Al-6061 T6 Custom MONO tubing, Smooth Welding, Cross Fun Geometry, Unisex 29er, SHIMANO STEPS DU hanger, 1st Gen. Battery Integration, OLD 135x9, Disc Brake Post Mount, Fender&Kickstand Ready Dropout, Replaceable RD Hanger, Inner Cable Routing
|
Fork |
RST Blaze, 1-1/8", 80 mm travel
|
Shifting |
SHIMANO ALTUS SL-M2010-9R RapidFire Plus, 9-speed
|
Derailleur |
SHIMANO ALTUS RD-M2000 Shadow
|
Cassette |
SHIMANO CS-HG200-9, 11-36T
|
Chain |
KMC e9S
|
Cranks |
SHIMANO FC-E5010, 38T
|
Rims |
WTB SX19, 32H
|
Front hub |
SHIMANO HB-TX505, 32H, CENTER LOCK, QR Type
|
Rear hub |
SHIMANO FH-TX505-8, 32H, CENTER LOCK, M10x135 mm, QR Type
|
Spokes |
Sapim Leader, Stainless Black with secure lock nipples
|
Tires |
WTB Riddler Comp, 29x1.75", Reflective Stripe
|
Seat post |
ONE1 Alloy, SP S405, 30.9 mm
|
Saddle |
WTB COMFORT WIDE
|
Stem |
One1 MAS-D61808 Alloy, 31.8 mm, ±15°
|
Handlebars |
ONE1 Alloy, MTB AL-325BT, 6° upsweep, 9° backsweep, 25 mm rise, 720 mm, 31.8 mm
|
Grips |
Velo ERGO
|
Headset |
ACROS ZS44/ZS56
|
Pedals |
Ball bearing, with sand non-slip inlay and reflector
|
Mudguards |
ALLOY FULL COVER FENDERS
|
Bell |
Widek Paperclip e-bike
|
Front light |
AXA Compactline 20
|
Rear light |
Spanning Pling XE
|
Pannier rack |
Alloy for AVS
|
Kick stand |
ATRAN VELO, DUX HV
|
Lock |
AXA Block XXL
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x9 |
Groupset | Shimano Altus |
Size | M, L, XL |
Colour | gloss metallic navy/silver |
Material | aluminium |
Wheel diameter | 29" |
Drive | Shimano STePS E5000 |
Battery | 504 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 80 mm |
product ID | 253325 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews