Giant Explore E+ 2 STA
Engine: SyncDrive Sport, 70Nm, powered by Yamaha
Control unit: RideControl Ergo
Display: RideDash Evo
Battery: EnergyPak Smart 500Wh EnergyPak Plus range extender compatible
Frame: ALUXX Aluminum, Overdrive head tube, integrated KS18 kickstand mount
Fork: SR Suntour NEX E25 NLO DS 63mm travel
Handlebars: Giant Connect Riser 31.8x690mm
Grips: Giant Contact Ergo Max Plus
Stem: Giant Contact
Seatpost: Giant 30.9mm, 2-bolt Micro Adjustable, Forged Aluminum
Saddle: Selle Royal Vivo Ergo Moderate
Pedals: Aluminum Platform
Shifting: Shimano Altus
Derailleur: Shimano Alivio, 9-speed
Brakes: Tektro HD-M275, hydraulic disc, 160/180mm
Brake levers: Tektro HD-M275
Cassette: Shimano CS-HG200, 11-36T, 9-speed
Chain: KMC e.9 Sport, e-bike optimized
Cranks: Forged Alloy minimal Q-factor, 42T
Rims: Giant eX2, Tubeless Ready, 700c Aluminum
Hubs: Giant eTracker, [F] 100x9mm QR [R] 135mm QR
Spike: Stainless steel
Tires: Giant Crosscut Gravel 2, 700x45c (622x45), Tubeless Ready, Reflex
Light: Axa BlueLine 30Lux Steady E6 frontAxa BlueLine Steady E6 rear
Carrier: MIK rack. System bag and basket compatible
Model year | 2022 |
Gears | 1x9 |
Material | aluminium |
Drive | Yamaha |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 153572 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews