Corratec E-Power 28 Urban Active 10s Wave 2018
E-bike, the advantages of which are comfort, safety and a powerful Bosch Active Plus motor.
Frame: E-Power 28 Active 10s Wave Material: Alloy 6061 PG
Fork: Corratec 187 AMS Suspension travel: 65mm
Brakes: Tektro HD-T285front Brake disc size: 160 mm
Stem: ZZYZX Floding Quill Material: Alloy
Handlebars: ZZYZX Trekking 640mm Material: Alloy
Seat: Corratec Trekking Gent Material: Black/Silver
Seatpost: ZZYZX Twin Bolt Suspension 30.9 Outer diameter: 30.9mm Material: Alloy
Gearbox: BOSCH Crank 38T Number of chainrings; Ratio: 1s; 38
Cassette: Shimano HG50 10s Number of pinions; Ratio: 10s; 11-13-15-17-19-21-24-28-32-36
Derailleur: Shimano T8000 Deore XT
Shifting: Shimano M6000 Deore
Rims: ZZYZX Trekking HD 28"Rim outer diameter:28.00zollType of tires:clincher with tubes
Tires: Continental E-Contact IIIinside diameter:28.00zollWidth:42mmType of tires:clincher with tubes
Converter gears: 1s; 38
Cassette transfers: 10s; 11-13-15-17-19-21-24-28-32-36
Fork travel: 65 mm
Brake disc size: 160 mm front160 mm rear
Engine: BOSCH Active Line Plus Harmoniously balanced or assertively powerful? Natural is what's important. The Bosch riding sensation creates a unique eBike experience. Three sensors measure pedaling power, cadence, and speed more than 1000 times per second. This enables the rider and the eBike to interact with each other organically. Just the right level of support with every push of the pedal – for relaxed bike tours and more power for everyday use. Ideal for leisure eBike enthusiasts, Drive Unit Active Cruise provides support at speeds up to 25 km/h and optimally balanced power. Max speed: 25 km/h Power: 250 watt Torque: 50 Nm JCompact and lightweight Exceptional design
Battery: BOSCH PowerPack 500 Performance CarrierbatteryEnergy: 500wh
Model year | 2018 |
Gears | 1x10 |
Groupset | Shimano Deore |
Drive | Bosch Active Line |
Battery | 500 Wh |
product ID | 52380 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews