Cannondale Quick Neo Tourer 2018 electric bike, SAMPLE
Trekking bike, Shimano Steps 250W motor, lighting, mudguards, carrier included
It is a bicycle from the exhibition. There are minor scratches on the bike. One piece in size M.
Model year: 2018
Wheel size: 28"
Frame: Quick NEO Disc Mens, SmartForm C2 Alloy, 1-1/8" headtube
Fork: SR Suntour NRX-D Magnesium, 63mm, coil, rebound adj, lockout, 1-1/8", 700c
Cranks: Shimano STEPS FC-E6000 170mm
Shifters: Shimano Deore M6000, 10-speed
Cassette: Shimano Deore HG50, 10-speed, 11-36T
Chain: Shimano HG54, 10-speed
Derailleur: Shimano Deore M6000, Shadow, 10-speed
Rims: Cannondale C2, 32h
Hubs: Shimano M475
Pedals: Cannondale Quick Pedal
Handlebars: Cannondale C4, 12mm rise, 680mm width
Brakes: Shimano M365L hydro disc, 180/160mm
Stem: Cannondale C-Series, 60mm (XS, S & M), 80mm (L)
Head composition: FSA Semi-Cartridge Standard Option
Brake levers: Shimano M365L hydro disc
Wires: Stainless 2.0
Tires: Schwalbe Energizer Plus TOUR, GreenGuard, reflective sidewall, 700x38c
Saddle: Cannondale Quick NEO
Seatpost: Cannondale C3, 6061 alloy, 27.2X350mm
Sizes: 50cm/M
Color: Stealth Gray w/ Cannondale Green and Fine Silver - Gloss (GRY)
Extras: Lights - Hermans H-Diver front / H-Trace rear, Cannondale Si Kickstand II, Racktime Light it Rack, Cannondale Reinforced fenders 50mm
Battery type: Shimano BT-E6010, 418 Wh
Motor: Shimano STEPS DU-E6001, 250W
Model year | 2018 |
Gears | 1x10 |
Groupset | Shimano Deore |
Material | aluminium |
Drive | Shimano STePS E6000 |
Battery | 400 Wh |
Brakes | Hydraulic disc brakes |
product ID | 48970 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews