Bianchi E-Spillo Classic Gent Altus 7sp, 2020
Fork: Bianchi Steel, V-Brake
Ch. Composition: VP-MH305C
Shifting: Shimano Altus SL-M310R 7sp
Derailleur: Shimano Altus RD-M310-L 7sp
Cranks: Prowheel ounce-248AC, w / 48T, length: 170mm
Chain: KMC HV700
Cassette: Shimano CS-HG200-7, 12-14-16-18-21-26-32T
Brakes: TX-121L, V-Brake
Brake levers: Aluminium. 4 finger
Wheels: Spectra 622-19
Rear hub: Formula FM-32
Front hub: EGoing motor unit
Tires: Spectra Unda Duramax Regular 700x37
stem: Aluminum adjustable, diameter 25.4mm,
Handlebars: Alloy, width 590mm, stroke 26mm, diameter. 25.4mm, 33° reverse bend
Grips: Gel, 130mm
Seatpost: Aluminum diameter 27.2mm, length: 350mm
Seat: Selle Royal Wave,
Pedals: included
Rear rack: AtranVelo Sport 28" Aluminum
front light: Retro Sport Led
Rear light: integrated in the flashlight
Motor: EGoing SYXC front hub Motor Unit, w / 418Wh Lithium battery, w / Led Display, w / Controller, w / Speed Sensor
Model year | 2020 |
Gears | 1x7 |
Groupset | Shimano Altus |
Material | aluminium |
Brakes | V-brakes |
product ID | 88756 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews