Tern NBD P8i 20 electric bicycle, blue
Tern NBD P8i 20 electric bike
Drive |
Bosch Active Line Plus, 270% Assist, 50 Nm Torque, max speed 25 km/h
|
Battery |
Bosch PowerPack 400
|
Charger |
Bosch Standard Charger
|
Display |
Bosch Intuvia, 4 mode selectable, walk assist
|
Frame |
Tern NBD, 6061-AL, Patented design, EFBE Tri-Test approved: 140 kg
|
Fork |
Tern Tarsus, 6061-AL, hydroformed, EFBE approved: 140 kg
|
Shifting |
Shimano 8-speed
|
Chain |
KMC for eBike, EPT corrosion resistant coating
|
Cranks |
Tern NBD custom, forged 6061-AL crankarm
|
Brakes |
Shimano, hydraulic disc
|
Rims |
Kinetix Comp, for disc
|
Front hub |
Shimano disc
|
Rear hub |
Shimano Nexus 8
|
Spikes and nipples |
Stainless steel
|
Tires |
Schwalbe Big Apple, 55-406, puncture protection, Reflex
|
Seat post |
Tern RideEasy Suspension, 34.9 mm
|
Saddle |
Tern Upright by Velo
|
Stem |
Tern Andros, adjustable, forged construction, patented technology
|
Handlebars |
Tern Sweep, 6061-AL, Tern Andros adapted
|
Grips |
Ergon
|
Headset |
Tern Flux by FSA, cartridge bearings, Physis integrated
|
Pedals |
MKS Platform, Tern custom design
|
Gear column |
Tern Physis 3D, 3D forged, 5 patented technologies, 12°, 350 mm
|
Multi-wheel |
16T
|
Range |
54 - 108 km
|
Pannier rack |
Gaia Rack, 27 kg capacity, Vertical Parking
|
Front light |
Tern Valo Direct, 190 lumens
|
Rear light |
Herrmans
|
Accessories |
ABUS lock, fenders, bell, chain guard
|
Sex | Men, Women, Unisex |
Model year | 2023 |
Gears | 1x8 |
Groupset | Other |
Weight | 23.7 kg |
Colour | blue |
Material | aluminium |
Wheel diameter | 20" |
Drive | Bosch Active Line |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
Rider height | 147-190 cm |
Rider weight limit | 120 kg |
Total weight limit | 140 kg |
product ID | 199437 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews