Wilier Cento1 Hybrid Ultegra Miche, model 2019
Fork: CARBON MONOCOQUE 46TON
Wheels: MICHE RACE AX WP DX + EBIKEMOTION X35 HUB
Cranks: SHIMANO ULTEGRA R8000 50 / 34T
Cassette: SHIMANO ULTEGRA R8000 11 / 30T
Gearing : SHIMANO ULTEGRA R8020
Derailleur: SHIMANO ULTEGRA R8000
SHIMANO ULTEGRA RD-R8000
Chain: SHIMANO ULTEGRA R8000
Brakes: SHIMANO ULTEGRA R8070 FLAT MOUNT
Tires : VITTORIA ZAFFIRO PRO 28MM
Stem: FSA OS-168
Handlebars: FSA OMEGA
Saddle: SELLE ITALIA X1
Seatpost : FSA GOSSAMER
Head composition: RITCHEY COMP
Wheels: SHIMANO 160MM 6 BOLTS
Middle composition: SHIMANO ULTEGRA PRESSFIT
Drive unit: MAHLE EBIKEMOTION X35 40 Nm
Battery: 250 Wh
Weight: 11.9 kg +/- 5%
Model year | 2019 |
Gears | 2x11 |
Groupset | Shimano Ultegra |
Material | carbon fiber |
Drive | Ebikemotion |
Battery | 250 Wh |
Brakes | Hydraulic disc brakes |
product ID | 106572 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews