Pinarello Nytro Roadstar 28 electric bike, black
Pinarello Nytro Roadstar 28 electric bike
The Pinarello Nytro Roadstar 105 electric bike comes loaded with new technologies. It is designed for everyone who is looking for a bike for new challenges and wants to get to new, unexplored places.A high-quality, durable frame is a matter of course for Pinarello models. The geometry of the bicycle is suitable for all types of riding with regard to the maximum comfort of the rider even during long routes.
The bicycle motor can be set to 3 levels of assistance:
- Breeze - gentle and constant assistance even with low rider performance. Up to 100 W.
- River - progressive and sporty mode for driving experience. Support power closely monitors your performance and adds to your performance accordingly. Up to 210 W.
- Rocket - the highest assistance mode that will help you conquer even the steepest sections. Up to 250 W.
Drive |
Fazua® EVATION RIDE 50
|
Battery |
Fazua® EVATION 1.0 250 Wh
|
Frame |
Aluminum with integrated battery and cable routing, 12x142 Tru-Axle
|
Fork |
Nytro Carbon Fork
|
Cassette |
Shimano 105 R7000, 11-speed, 2x11
|
Brakes |
Shimano 105 2 pistons caliper, 160mm rotor
|
Tires |
Pirelli P7 black 60 tpi Nylon breaker
|
Handlebars |
Jaguar XA Aero Di2
|
Model year | 2022 |
Gears | 2x11 |
Material | aluminium |
Wheel diameter | 28" |
Drive | Fazua |
Battery | 250 Wh |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
Max. possible shell width | 28 mm |
product ID | 139321 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews