Pinarello Nytro Gravel Force 1X11 Fulcrum Rapid Red 500 700C
The new Pinarello Nytro Gravel Force model brings innovations that will bring you the joy of driving on any type of terrain. Enjoy adventure in every situation.
The carbon frame of the T700 bicycle guarantees excellent handling and performance while maintaining low weight. Low weight has also been achieved with the new engine and battery of the Fauza Evation system, which are located in the lower tube, which also allows the use of larger wheels up to 700x42c or 650Bx2.1
Frame: TorayCa T700 UD with integrated battery and cable management,
Fork: Nytro Gravel Onda Carbon Fork with ForkFlap Tap, Tapered Head Tube
Cranks: Most Custom Chainrings
Derailleur: SRAM Force 1x11
Cassette: SRAM Force
Chain: SRAM Force 11S
Engine: Fazua® EVATION RIDE 50
Battery: Fazua® EVATION 1.0 250 Wh
Display: Fazua® Remote FX
Front brake and: SRAM Force 2 pistons caliper, 160mm rotor
Rear brake: SRAM Force 2 pistons caliper, 160mm rotor
Handlebars: Jaguar XA Aero Di2
Stem: Tiger Alu Aero Di
Grip: Bar Tape MOST ULTRAGRIP evo 3mm BLACK
Saddle: MOST Lynx Aircross FEC Alloy Large 145mm
Seatpost: Pinarello Aero Seatpost with titanium bolts
Tires: VITTORIA Terreno Zero 650Bx2,1 "
Wheels: Fulcrum Rapid Red 500
Model range: NYTRO GRAVEL
Sport / use: cycling
Model year | 2022 |
Gears | 1x12 |
Material | carbon fiber |
Drive | Fazua |
Battery | 250 Wh |
Brakes | Hydraulic disc brakes |
product ID | 139921 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews