Mondraker Dusty RR 28 electric bike, frost green/cherry red/carbon
Mondraker Dusty RR 28 electric bike
An electric bike that offers maximum professional performance. Equipped with the best that the component manufacturer has to offer, made of lightweight materials for the lowest possible weight.
Drive |
Mahle X20 Drive Unit
|
Battery |
Mahle X20 IX350Wh
|
Frame |
Dusty Stealth Air Carbon, pressfit 386 EVO bottom bracket, tapered head tube, HHG internal cable routing, integrated internal non-removable battery, 12x142 mm rear axle, 1X or 2X drivetrain design, Flatmount brake compatible, integrated dropout speed sensor.
|
Fork |
Steatlh Air Carbon tapered steerer tube, HHG, flat mount integrated fork
|
Shifting |
Sram Rival Etap AXS 12-speed, X-Actuation 1:1, single click
|
Derailleur |
Sram Rival XPLR Etap AXS, 12-speed
|
Cassette |
Sram XG-1251 10-44T, 12-speed
|
Chain |
Sram Rival, 12-speed, Powerlock
|
Cranks |
Sram Rival 1 DUB GLS Wide, S: 170 mm, M/L: 172.5 mm, XL: 175 mm.
|
Brake levers |
Sram Rival, contact point adjustment, tooled reach adjustment, plastic levers
|
Rims |
Mavic Allroad Disc, UST, 22 mm internal width, hookless, infinity hubs, 24 spokes
|
Front hub |
Mavic, 12x100mm, IS 6 bolts
|
Rear hub |
Mavic X20, 12x142 mm, XD ID360 Ratchet system, IS 6 bolts
|
Spokes |
Steel double butted flat spokes
|
Tires |
Maxxis Rambler 700x40, tubeless ready, dual compound EXO protection, 60 TPI, folding bead, tan wall
|
Seat post |
OnOff Barium gravel carbon microadjust, Ø 27.2 mm, 400 mm
|
Saddle |
FIZIK Terra Argo X7 150 mm
|
Stem |
OnOff gravel 6061 T6 Alloy, 31.8 mm barbore, rise +/-7º, S/M: 70 mm, L: 80 mm, XL: 90 mm
|
Handlebars |
OnOff Barium gravel 18º bar flare. S/M: 440 mm, L/XL: 460 mm
|
Headset |
OnOff gravel tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
|
Bottom bracket |
Mahle pressfit, sealed bearings, w/ torque sensor
|
Model year | 2023 |
Gears | 1x12 |
Material | carbon fiber |
Wheel diameter | 28" |
Drive | Mahle X20 |
Battery | 350 Wh |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 208240 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews