Mondraker Dusty R electric bike, desert grey/orange/carbon
Mondraker Dusty R 28 electric bike
Drive |
Mahle X20 Drive Unit
|
Battery |
Mahle X20 IX350 Wh
|
Frame |
Dusty Stealth Air Carbon, pressfit 386 EVO bottom bracket, tapered head tube, HHG internal cable routing, integrated internal non-removable battery, 12x142 mm rear axle, 1X or 2X drivetrain design, Flatmount brake compatible, integrated dropout speed sensor.
|
Fork |
Steatlh Air Carbon tapered steerer tube, HHG, flat mount integrated fork
|
Shifting |
Sram Rival 1 11s, X-Actuation 1:1, single click
|
Derailleur |
Shame Rival 1, 11s
|
Cassette |
Sram XG-1150 10-42T, 11s
|
Chain |
Sram PC-1110, 11s, Powerlock
|
Cranks |
Sram Rival 1 DUB GLS Wide, S: 170 mm, M/L: 172.5 mm, XL: 175 mm
|
Brake levers |
Sram Rival, tooled reach adjust, aluminum levers
|
Rims |
MDK-XG1, 23 mm internal width, tubeless ready, 32 spokes
|
Front hub |
Novatec D041, Boost 12x100 mm, sealed bearings, IS 6 bolts
|
Rear hub |
Mahle X20 12x142 mm, sealed bearings, IS 6 bolts
|
Spokes |
CN round stainless steel
|
Tires |
Maxxis Rambler 700x40C, tubeless ready, dual compound EXO protection, 60 TPI, folding bead, tan wall
|
Seat post |
OnOff Barium gravel carbon microadjust diameter 27.2 mm, length 400 mm
|
Saddle |
FIZIK Terra Argo X7 150 mm
|
Stem |
OnOff gravel 6061 T6 Alloy, 31.8 mm barbore, rise: +/-7º, length: sizes S/M: 70 mm, size L: 80 mm, XL: 90 mm
|
Handlebars |
OnOff Barium gravel 18º bar flare. Width sizes S/M: 440 mm, size L/XL: 460 mm
|
Headset |
OnOff gravel tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
|
Bottom bracket |
Mahle pressfit, sealed bearings, w/ torque sensor
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x11 |
Groupset | SRAM Rival |
Size | S, M, L, XL |
Colour | desert grey/orange/carbon |
Material | carbon fiber |
Wheel diameter | 28" |
Drive | Mahle X20 |
Battery | 350 Wh |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 226026 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews