Lapierre eXelius SL 600 W Disc, model 2020
The E-Xelius SL perfectly integrates the Fazua drive system. A huge advantage of the frame is its weight. The frame without drive in size M weighs only 1.65 kg. Thanks to the controls on the handlebars, you can easily choose one of the three assistance modes: Breeze, River or Rocket + mode without assistance.
The advantage of the Fazua Evation drive system is that it does not put any resistance against the pedals when the engine is off, even when the drive turns off at a speed of more than 25 km / h. You will feel the same as if you were stepping on a classic path. Driving without Fazu drive? No problem. Just remove the motor and battery, which reduces the weight of the wheel by 3.3 kg.
With a construction based on the first generation Xelius SL Disc chassis, the frame exudes a sporty spirit with excellent stability. You can look forward to a pleasant climb and on the way down you can rely on a stable and easy-to-manage bike.
Material: Carbon
Wheel size: 700x28
Frame: E-XELIUS SL CARBON DISC THRU AXLE
Fork: E-XELIUS SL 100% CARBON DISC THRU AXLE
Derailleur: SHIMANO ULTEGRA RD-R8000GS, 11s
Cranks: FSA phase ARMSET, ALLOY, 50X34T 170mm (M) 172.5mm (L)
Cassette: SHIMANO 105 CS-HG700 11s 11-34T
Chain: SHIMANO HG601 11s
Shifting: SHIMANO 105 2x11 K-R7025 with Levers for SMALL HANDS
Head composition: FSA ORBIT C33 1" 1/8 1" 1/4 + 15mm top cover
Handlebars: Lapierre ALLOY 38cm (M) 40cm (L)
Grips: Lapierre VEXGEL TAPE
Stem: Lapierre ALLOY AERO -8 ° 31.8mm 80mm (M, L)
Seatpost: Lapierre ALLOY 3D FORGED 27.2x350mm
Saddle: Fizik Arion DONNA MG
Tires: CONTINENTAL GRAND SPORT RACE SL 700X28
Pedals: VP-335 Clips & Strap
Derailleur: SHIMANO ULTEGRA KFDR8000F
Braided wheels: DT SWISS ER1600 DICUT 21 Tbless
Reels: SHIMANO SMRT800 160mm
Engine: Fazua EVATION 1.0 DRIVE PACK + 250 Wh BATTERY PACK + REMOTE CONTROL
Model year | 2020 |
Gears | 2x11 |
Groupset | Shimano Ultegra, Shimano 105 |
Material | carbon fiber |
Drive | Fazua |
Battery | 250 Wh |
Brakes | Hydraulic disc brakes |
product ID | 88256 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews