Cannondale Synapse NEO SE 2019 road electric bicycle
NET PERFORMANCE
The Bosch Generation 3 Active Line Plus engine is an excellent road e-bike drive. It is quiet, powerful, light and has virtually zero resistance when the engine is disconnected.
YOU DON'T HAVE TO BE FEARED FROM A LOW TRAVEL
The PowerTube battery with a large capacity of 500Wh is integrated into the lower frame tube and provides enough energy even for the longest days in the saddle. Drive as far as you want and Synapse NEO will get you back home.
ROAD TRANSFERS
The Synapse NEO is the only road bike equipped with a Bosch twin-engined engine, so you'll always find the right gear to get the most out of it.
SELF - CONFIDENT PROCEEDINGS
The OutFront geometry brings stability at higher speeds and at the same time the agility and agility of road bikes. As a bonus, it reduces the chance of you kicking the tip of the front wheel with smaller frame sizes.
ALL-DAY COMFORT
The driver's endurance position, comfortable 700x32c tires and Cannondale SAVE micro-suspension will bring you comfort even during the longest and most demanding days.
Frame: ALL-NEW Synapse NEO, SmartForm C1 Alloy, SAVE, Ai, flat mount brake, 142x12 thru-axle
Fork: ALL-NEW Synapse NEO Disc, Ballistec Carbon, 1-1 / 8 "to 1.5" tapered steerer, 55 mm offset, flat mount, 12x100 thru axle
Cranks: Bosch Gen3 w / custom Ai offset spider & FSA rings, 50/34
Derailleur: SRAM Apex 1, Long cage
Gear levers: SRAM Apex 1 HRD, 11-speed
Cassette: SRAM PG-1130, 11-42, 11-speed
Chain: SRAM PC-1110, 11-speed
Brakes: SRAM Apex 1 HRD, 160/160 mm Centerline rotors
Brake levers: SRAM Apex 1 HRD
Rims: WTB ST i23 TCS 2.0, 28h front, 28h rear
Hubs: Formula RX-512 12x100 front, DC -142 rear
Wires: DT Swiss Champion
Tires : WTB bywa TCS, 650B x 47 mm, tubeless ready
Handlebars: Cannondale C3, 6061 Alloy Compact
before : Cannondale, 3D Forged 6061 Alloy, 1-1 / 8 ", 31.8, 6 °
Head composition: Integrated, 1-1 / 8 to 1.5 ", sealed angular contact bearings
Saddle: Fabric Scoop Radius Elite, cro-mo rails
Seatpost: Cannondale C3, 6061 Alloy, 25.4X350 mm
Color: Stealth Gray w / Jet Black - Gloss (SGY)
Extra: Prewired front and rear light cable
Engine: Bosch Active Line Plus 250W
Battery type: Bosch PowerTube 500Wh
Charger: Bosch 4A
Display: Bosch Purion
Model year | 2019 |
Gears | 2x11 |
Material | aluminium |
Drive | Bosch Active Line |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 74840 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews