Cannondale SuperSix Neo 2, 2021 model
Ballistec Carbon carbon frame, MAHLE 250 W motor, Shimano Di2 set.
Cannondale SuperSix EVO Neo is a big step in the field of electric bikes. Cannondale took its most successful road model and built a no-compromise electric road bike based on it.
It is no longer the case that the electric bicycle always had to be massive and unsightly. Cannondale created an aerodynamic frame from Ballistec Carbon with a truncated tube profile. The bike has 30% better aerodynamics compared to the round profile.
In size L for the Neo 1 model, the weight stops at 11.3 kg. This is a full-fledged road bike that will not get lost in the pack with non-electric competitors.
The drive from MAHLE has a power of 250W even with its small size and is embedded in the rear wheel. The battery has a capacity of 250 Wh, is hidden in the frame and does not destroy the clean shapes of the frame in any way. It is conveniently controlled simply by one button on the upper frame tube. There is also a simple and clear battery capacity indicator in the same place.
Frame: Ballistec Carbon Frame, internal downtube battery, SAVE, T47, flat mount disc, integrated seat binder
Fork: Ballistec Carbon, SAVE, integrated crown race, 12x100mm Speed Release thru-axle, flat mount disc, internal routing, 1-1/8" to 1-1/4" steerer and 55mm offset (S, M), 1- 1 / 8" to 1-3 / 8" steerer and 45mm
Motor: Mahle ebikemotion X35 250W
Battery type: Mahle ebikemotion X35 250Wh
Charger: Mahle ebikemotion X35
Cranks: HollowGram, T47, OPI Spidering, 50/34
Shifters : Shimano Ultegra Di2, 11-speed
Cassette: Shimano, 11-34, 11-speed
Chain: Shimano HG701, 11-speed
Derailleur: Shimano Ultegra Di2, Brage-on
Derailleur: Shimano Ultegra Di2 GS
Rims: Cannondale RDE 1.0, 28h front, 32h rear
Hubs: (F) Formula RX-812, 12x100 disc / (R) ebikemotion X35 250W disc
Brakes: Shimano Ultegra Di2 hydraulic disc, 160 / 160mm RT66 rotors
Stem: HollowGram KNOT, Alloy w / cable cover, -6 °
Headstock: Integrated, 1-1/8" to 1-1/4" (S, M), 1-1/8" to 1-3/8" (L)
Handlebars: HollowGram SystemBar SAVE, Carbon, 8 deg. pitch adjust
Brake levers: Shimano Ultegra Di2 hydraulic disc
Tip: (F) Stainless Steel, 14g / (R) 13g
Saddle: Prologue Dimension NDR, Tirox rails
Seatpost : HollowGram 27 SL KNOT, Carbon, 2 bolt clamp, 330mm, 15mm offset
Battery | 250 Wh |
Drive | Ebikemotion |
Model year | 2021 |
Groupset | Shimano Ultegra |
Gears | 2x11 |
Brakes | Hydraulic disc brakes |
Material | carbon fiber |
product ID | 120422 |
Horské, mestské a krosové
Veľkosť | Výška jazdca |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Veľkosť | Výška jazdca |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Veľkosť | Výška jazdca |
---|---|
Univerzálna | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
comment Reviews
There are currently no reviews