Lapierre Overvolt HT 4.5 High 29 electric bicycle, night blue
Lapierre Overvolt HT 4.5 High 29 electric bike
MTB e-hardtail LAPIERRE Overvolt HT 4.5 with Bosch Active motor and battery with a capacity of 500 Wh has a solid aluminum frame made of Supreme 5 alloy and an SR Suntour suspension fork, ensuring 100 mm of travel, for your maximum comfort. In addition to the fork, the model is equipped with a reliable Shimano shifter and Tektro brakes. The combination of these components will guarantee you safety, comfort and performance during your journeys on cycle paths, in the forest and in the mountains.While driving, you can change the assistance modes depending on how much assistance you need. All driving data such as distance, speed, battery charge status or level of assistance are displayed on the easy-to-read display on the left side of the handlebars.
Can handle occasional trips on paved and unpaved roads even in moderate terrain, but with frequent driving, the components will need regular fine-tuning.
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Coil fork
Provides adequate comfort and is usually installed on bicycles for recreational and less demanding riding. The disadvantage is its relatively heavy weight.
29” wheels
The advantage is better terrain passability, better rolling and traction. However, they are heavier, which also applies to tires.
| Drive |
Bosch Active Line Plus BES3
|
| Battery |
500 Wh
|
| Display |
LED Remote
|
| Frame |
Overvolt Bosch Supreme 5 alloy
|
| Fork |
SR Suntour XCM 32 DS 15x100 100 mm
|
| Derailleur |
Shimano CUES U3020 9s Shadow
|
| Cassette |
Shimano CUES LG300 11-36T 9s
|
| Chain |
Shimano CUES LG500 9/10/11s
|
| Cranks |
Samox 170 mm + 34T steel chainring
|
| Brakes |
Tektro HD-M275 ACC-14 180/180 mm
|
| Wheels |
Fastace hubs / Schürmann Yak 25 rims
|
| Tires |
WTB Ranger 29x2.3'' Comp
|
| Seat post |
Kalloy Alloy, Ø: 31.6 mm, L: 350 mm
|
| Saddle |
Lapierre
|
| Stem |
Alloy, 0°, Ø: 31.8 mm, L: 45 mm
|
| Handlebars |
XLC Alloy 6061 DB, Width: 720 mm, Rise: 15 mm, Ø: 31.8 mm
|
| Grips |
Velo Lock-on
|
| Headset |
Feimin 1.1/8" - 1.5 Tapered
|
| Pedals |
XLC by VP
|
| Sex | Men, Unisex |
| Model year | 2024 |
| Gears | 1x9 |
| Groupset | Other |
| Size | M, L, XL |
| Colour | blue |
| Material | aluminium |
| Wheel diameter | 29" |
| Drive | Bosch Active Line |
| Battery | 500 Wh |
| Brakes | Hydraulic disc brakes |
| Fork | Spring |
| Fork travel | 100 mm |
| Telescopic seat post | no |
| product ID | 262980 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
-38% Raymon HardRay E 4.0 29 e-bike, armor/black/mustard matte
1,799 €
-38%
RRP 2,899 €
Sale -11% FORCE MTB Warrior Carbon cycling shoes, black
from 123 €
-11%
RRP 204 €
Sale -21% Leatt HydraDri 5.0 ProClip cycling shoes, black
from 142 €
-21%
RRP 199 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews