Giant Talon E+ 2 29 electric bike, metallic blue
Giant Talon E+ 2 29 electric bike
Enough strength and energyYamaha's SyncDrive Core mid-engine produces 50Nm of torque and a maximum boost of 300%. It is therefore not as powerful as other SyncDrive motors, but thanks to this, it has a lower energy consumption from the EnergyPak 500 Wh lithium battery. You can find the battery on the lower frame tube, with which it blends elegantly. It is secured on the frame with a lock and is removed to the side.
Smart Assist automatic mode
The engine offers you five driving modes with a set support value, as well as a fully automatic Smart Assist mode, in which the system sets the amount of engine assistance for you. Thanks to this, you can completely forget about switching modes while driving and concentrate on driving itself. Because of this function, the bike is also equipped (in addition to the four basic sensors) with acceleration and tilt sensors.
Control unit with display
The RideControl Dash unit, which is right at hand on the left handle, allows you to comfortably control your electric bike. In addition to the buttons for switching driving modes, this unit also includes a clear and very easy-to-read color display, which shows the most important driving data, including the exact state of the battery. There is also a USB-C connector that will come in handy for charging your phone.
Can handle occasional trips on paved and unpaved roads even in moderate terrain, but with frequent driving, the components will need regular fine-tuning.
Drive |
SyncDrive Core, 50Nm, Powered by Yamaha
|
Battery |
EnergyPak 500Wh
|
Display |
RideControl Dash, full color LCD screen
|
Frame |
ALUXX Aluminum, Overdrive 11 - 1" head tube, integrated KS18 kickstand mount
|
Fork |
SR Suntour XCM ATB Coil 29" 100 mm travel, Tapered 11 - 1" steerer
|
Shifting |
Shimano Altus
|
Derailleur |
Shimano Alivio, 9-speed
|
Cassette |
Shimano CS-HG200, 11-36T, 9-speed
|
Chain |
KMC e.9 Sport, e-bike optimized
|
Cranks |
FSA Comet E-Bike crank arm set FSA MegaTooth Direct-mount 1X steel 36T
|
Brakes |
Tektro HD-M275, hydraulic disc, 160 mm / 180 mm
|
Brake levers |
Tektro HD-M275
|
Rims |
Giant GX03V
|
Hubs |
Giant eTracker Sport, Front: 9mm QR / Rear: 135mm QR
|
Spokes |
Stainless steel
|
Tires |
Maxxis Rekon 29x2.4" Wire Bead 60TPI
|
Seat post |
Giant 30.9 mm, 2-bolt Micro Adjustable, Forged Aluminium
|
Saddle |
Giant Sport
|
Stem |
Giant Contact
|
Handlebars |
Giant Connect TR Riser 31.8mm x 690~750mm
|
Grips |
Giant Sole-O Grip
|
Pedals |
Aluminum Platform
|
Control unit |
RideControl Dash, full color LCD screen
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x9 |
Groupset | Shimano Alivio, Shimano Altus |
Colour | metallic blue |
Material | aluminium |
Wheel diameter | 29" |
Drive | Yamaha |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 157109 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews