Giant Fathom E+ 3 29 electric bike, sangria
Giant Fathom E+ 3 29 electric bike
Can handle occasional trips on paved and unpaved roads even in moderate terrain, but with frequent driving, the components will need regular fine-tuning.
Drive |
Giant SyncDrive Sport, 70 Nm, PedalPlus 6-sensor technology
|
Battery |
Giant EnergyPak 500 Wh, Aluminum casing with highest safety standard (EN50604), CO2 Neutral production, Giant EnergyPak Plus 250 range extender compatible
|
Display |
Giant RideControl Dash, high-angle visibility, full color LCD display
|
Frame |
ALUXX aluminum, Overdrive 1½ - 1⅛" head tube, 141mm Boost QR, ISS, EnergyPak Plus Range Extender compatible, integrated KSA18 kickstand mount
|
Fork |
SR Suntour XCM32 NLO DS 15AH2 29, 120 mm travel, tapered steerer, lockout
|
Shifting |
microSHIFT ADVENT e-optimized
|
Derailleur |
microSHIFT ADVENT, 9-speed
|
Cassette |
microSHIFT ADVENT, 11-42T, 9-speed, e-optimized
|
Chain |
KMC e.9 Sport, e-bike optimized
|
Cranks |
FSA MegaTooth direct-mount 1X steel 36T alloy crank arm
|
Brakes |
Tektro HD-M285, hydraulic disc, 180 mm
|
Rims |
Giant XCT 29 Tubeless Ready 25 mm e-bike optimized
|
Hubs |
Shimano HB-TC500-15 100x15 mm [F], MT200-B 141 mm OLD QR [R]
|
Spokes |
Stainless steel
|
Tires |
Maxxis Rekon 29x2.4" Wire Bead 60 TPI
|
Seat post |
Giant 30.9 mm, 2-bolt Micro Adjustable, Forged Aluminium
|
Saddle |
Giant Sport
|
Stem |
Giant Contact 31.8 alloy
|
Handlebars |
Giant Connect TR Riser 31.8 alloy 750 mm [S], 780 mm [ M-XXL]
|
Grips |
Giant Tactal single lock-on
|
Pedals |
Aluminum Platform
|
Control unit |
Giant RideControl Dash, Smart Assist automatic mode, 5 support levels, USB-C (10W)
|
Sex | Men, Unisex |
Model year | 2024 |
Gears | 1x9 |
Groupset | microSHIFT ADVENT |
Colour | sangria |
Material | aluminium |
Wheel diameter | 29" |
Drive | Yamaha |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 120 mm |
Telescopic seat post | no |
product ID | 288965 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews