Raymon TrailRay 160E 10.0 29 e-bike, deep red/black
Choose personal collection at the store and decide on the spot.
Raymon TrailRay 160E 10.0 29 e-bike
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
Drive |
Yamaha PW-X3, 250 W, 85 Nm
|
Battery |
Simplo, 720 Wh, 36 V
|
Display |
Yamaha X
|
Frame |
ALU 6061
|
Fork |
RockShox Domain RC, DebonAir, 170 mm, tapered
|
Shock |
RockShox Super Deluxe Select Plus
|
Shifting |
SRAM SX Eagle, Single Click
|
Derailleur |
SRAM SX Eagle, 12-S
|
Cranks |
R Raymon, Narrow Wide, 38 T
|
Brakes |
SRAM G2 R hydraulic / SRAM Centerline, 200 mm/200 mm
|
Front tyre |
Schwalbe Magic Mary, Evolution, 29x2.4" Tubeless Ready
|
Rear tyre |
Schwalbe Hans Dampf, Evolution, 29x2.35" Tubeless Ready
|
Seat post |
R Raymon Pro, 34.9 mm, Dropper Post
|
Saddle |
R Raymon MTB
|
Stem |
R Raymon 35, 0 °, Ahead
|
Handlebars |
R Raymon Riser 35 mm, 780 mm, Sweep: 9 °, Rise: 20 mm
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x12 |
Groupset | SRAM SX |
Size | S, M, L, XL |
Colour | red |
Material | aluminium |
Wheel diameter | 29" |
Drive | Yamaha |
Battery | 720 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 160 mm |
Shock | Air |
Rear travel | 160 mm |
Telescopic seat post | yes |
product ID | 310649 |




All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews