Mondraker LEVEL R, black/dirty white
Fork: Fox 38 29 Float FIT GRIP EVOL Performance, 180 mm, e-bike tuned, tapered post, Boost axle 15x110 mm, offset 44 mm. Adjustments: 3 positions with micro compression adjustment, low speed rebound, air preload
Head assembly: Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, sealed ACB bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
Derailleur: Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1
Gearing: Sram Trigger NX Eagle, 12s, X-Actuation 1:1
Brake levers: Sram G2 RS, SwingLink and pivoting lever bearings, tool-free reach and contact point adjustment
Cranks: ebike Race Face Aeffect, 165 mm
Derailleur : Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD
Handlebars: Onoff Sulfur 1.0 Double Reinforced 6061 Alloy, Travel: 20mm, Width: 800mm, 9º backsweep, 5º upsweep, 31.8mm
Stem: Onoff Sulfur FG 30mm 0º, 6061 forged alloy, 31.8mm
Seatpost: Onoff Pija dropper internal, diameter 31.6mm, S size: 387x125mm, M size: 425x150mm, L/XL size: 465x170mm
Saddle: FIZIK Terra Aidon X5 145mm
Front hub: Mavic, Boost 15x110mm, IS 6 screws
Rear hub: Mavic, Boost 12x148mm, ID360 Ratched system, IS 6 screws
Chain: Sram SX Eagle, 12s, Powerlock
Cassette: Sram PG-1210, 11-50T, 12s
Tip: Mavic J-bend
Rims: Mavic E-Deemax 29, inner width 30 mm, welded, PFP, tubeless, 28 spokes
Tires: Maxxis Assegai 29x2.5WT, tubeless ready, 3C MAXX GRIP compound, DH tire, 60x2TPI, folding tread
Engine + Battery Bosch Performance Line CX Cruise (25Km/h) GEN4 BS3, Bosch Powertube 750Wh, Bosch Kiox 300
Weight: 26.1 kg
Model year | 2022 |
Gears | 1x12 |
Material | aluminium |
Drive | Bosch Performance Cruise |
Battery | 756 Wh |
Brakes | Hydraulic disc brakes |
product ID | 196317 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews