Mondraker Crafty RR 29, model 2020
Fork:: Fox 36 29 Float Fit4 3pos Factory Kashima, optimized for eBike, Boost tapered, travel 160mm
Damper: Fox Float DPX2 LV EVOL Performance, 205x65mm. Settings: compression 3 positions lever, low-speed rebound, air preload. Trunnion top mount, 25x10mm bottom bushings
Head composition: Onoff Saturn ACB Bearings integrated tapered, bearings 1-1/8"-1/5"
Derailleur: Sram GX Eagle X-Horizon Type3, 1x12 speed
Shifting: Sram NX Eagle right single click, 12 speeds
Brake levers: Sram Code R
Cranks and shifters: RaceFace Aeffect length 165mm, optimized for eBike, 34 teeth
Handlebars: Onoff Sulfur 1.0, width 780mm
Stem: Onoff Sulfur FG30 0º
Seat post : Onoff Pija internal 1x lever, telescopic
Saddle: SDG Bel-Air 2.0, CR-MO rails
Front hub: DT Swiss Hybrid SPILINE 370s based, axle 15X110mm
Rear hub: DT Swiss Hybrid SPILINE 370s based Pawl System, axle 12x148mm
Chain: Sram NX Eagle, 12 speeds
Cassette: Sram Eagle XG1230, 11-50 teeth, 12 speeds
Spokes: Hybrid System, eBike specific, SP spoke
Rims: Dt Swiss Hybrid H1900 SPLINE, rim width 30mm, braided set
Tyres: Maxxis Minion DHF 29, width 2.6 3C/EXO+/TR MAXX TERRA / Maxxis Minion DHR II 29, width 2.6 3C/EXO+/TR MAXX TERRA
Drive unit: Bosch Performance Line G4 CX system w/Intube
Battery: Bosch PowerTube 625Wh
Display: Kiox
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM GX, SRAM NX |
Material | aluminium |
Drive | Bosch Performance CX |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 108806 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews