Mondraker Crafty Carbon RR 29 electric bike, earth red/black/flame red
Mondraker Crafty Carbon RR 29 e-bike
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
Drive |
Bosch Drive Unit Performance Line CX, Smart System
|
Battery |
Bosch PowerTube 800 Wh
|
Display |
Purion 400 / Bosch Mini Remote / Bosch System Controller
|
Frame |
Crafty Stealth Air full Carbon front triangle, Alloy Stealth rear triangle, optimized Zero Suspension System, 150 mm travel, Forward Geometry, removable internal battery, Boost 12x148 mm rear axle, tapered head tube, one-piece top link, HHG internal cable gland, sealed bearings with MAX load capacity, 15 mm oversized axles, exclusive plastic motor covers.
|
Fork |
Fox 38 29 Float GRIPX2 Factory Kashima, 160mm, tapered head tube, 15x110mm Boost axle, 44mm offset. settings: high and low speed compression, high and low speed rebound, air preload
|
Shock |
Fox Float X Factory Kashima EVOL, 185x55 mm. Settings: 2-position compression (Open/Locked), rebound, air preload. Trunnion upper mount, 30x8 mm lower bushings
|
Shifting |
SRAM Eagle AXS Under MMX, 12s
|
Derailleur |
SRAM GX Eagle AXS, T-Type, 12s
|
Chain |
SRAM GX Eagle T-Type, 12s, Powerlock
|
Cranks |
Race Face Aeffect-R, 160 mm, SRAM steel, narrow-wide, 104 BCD CL55
|
Brakes |
Sram Maven Bronze, 4-piston caliper 18 and 19.5 mm, brake disc one-piece Centerline 200 mm/200 mm with 6 IS bolts, sintered metal pads with steel support
|
Rims |
Mavic E-Deemax 29, 30 mm internal width, welded, PFP, tubeless ready, 28 spokes
|
Front hub |
Mavic, Boost 15x110 mm, 6 bolts IS
|
Rear hub |
Mavic, Boost 12x148 mm, Ratched ID360 ratchet system, 6 bolts IS, XD freehub
|
Front tyre |
Maxxis Minion DHF 29x2.6 WT, TR, 3C MAXX TERRA , EXO+ protection, 120 TPI, folding bead
|
Rear tyre |
Maxxis Minion DHR II 29x2.6 WT, TR, 3C MAXX TERRA , EXO+ protection, 120 TPI, folding bead
|
Seat post |
ONOFF Pija internal telescopic, diameter 31.6 mm, 1X remote lever with bearing, size S: 140-115 mm (388-235 mm), size M: 160-135 mm (428-255 mm), size L: 180-155 mm (468-275 mm), size XL: 210-185 mm (528-305 mm)
|
Saddle |
Ergon SM-10
|
Stem |
ONOFF S6 30 mm 0º, forged alloy 6061 + CNC, barbore 31.8 mm
|
Handlebars |
ONOFF S6 1.0 alloy 7050, rise: 25 mm, width: 800 mm, backsweep 8º, upsweep 5º, barber 31.8 mm. Size L and XL: rise 1.5.
|
Bottom bracket |
SRAM XS-1275, 10-52T, T-Type 12s
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 1x12 |
Groupset | SRAM GX |
Size | S, M, M/L, L, XL |
Colour | red/black/flame red |
Material | carbon fiber |
Wheel diameter | 29" |
Drive | Bosch Performance CX |
Battery | 800 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 160 mm |
Shock | Air |
Rear travel | 150 mm |
Telescopic seat post | yes |
product ID | 315837 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews