Haibike XDURO Nduro 8.0 i630Wh HB Flyon model 2020
Display Flyon, The Display
Flyon Battery, The Battery, 630 Wh
Haibike frame, XDURO NDURO, Carbon / aluminum, Thru-axle M12 (1.75) x 148mm, Disc brake Post Mount, Travel = 180 mm
FOX plug, 36 Float Performance, Air, Travel = 180 mm, Aluminum steerer tube 1 1/8 "- 1 1/2" tapered, 15 x 100mm thru-axle
Shock absorber FOX, Float X2 Performance, Air
Shimano brakes, Deore XT M8020, 203 mm, 4-piston disc brake
Rim Rodi, Tryp 35, with eyelets, hollow rim, Aluminum
Shimano, Deore XT M8000 derailleur
Shimano gear lever, Deore XT M8000, Rapidfire, 11 speed
Shimano cassette, SLX M7000, 11 - 46 teeth
Shimano chain, HG601
Converter Haibike Components, Aluminum, 38 teeth
Schwalbe tires, Magic Mary, 65-584, 27.5 "x 2.60"
Haibike Components wheels, TheHub ++, 6-bolt standard
Tip DT Swiss, Industry, black
Haibike Components handlebars, The Bar +++, 780 mm
Grips Haibike, MTB grips
Haibike Components, TheStem 2, A-head, Bar height: 31.8 mm
Saddle Haibike Components, TheSaddle
Seatpost XLC, AllMtn, Remote, Telescope, 34.9 mm, Aluminum
Feimin pedals, MTB platform pedal, Aluminum
Weight (KG) 28.1 kg
Load capacity 120.0 kg
Model year | 2020 |
Gears | 1x11 |
Groupset | Shimano XT, Shimano SLX |
Material | carbon fiber |
Drive | Bosch Performance CX |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 111716 |
The table is indicative. On the manufacturer's website, you will find geometry and an accurate calculator for each model, which calculates the size based on height, leg and arm length, and preferred riding style.
Size | S | M | L | XL |
---|---|---|---|---|
Rider height (cm) | 159 - 170 | 168 - 179 | 177 - 188 | 186 - 196 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews