Haibike XDURO AllMtn 3.5 i625Wh black / black / lime, model 2020
Engine: Bosch Performance CX, 250W, 75Nm, 25km / h
Display: Bosch Purion
Battery: Bosch PowerTube, 625 Wh
Charger: Bosch Standard Charger 4A
Fork: RockShox Lyrik Select, air / oil, stroke: 160mm, Aluschaft 1 1/8 - 1 1/2 '' tapered, fixed axle Boost
Muffler: RockShox Deluxe Select Plus, air, 65mm
Gear: Shimano SLX M7100, 12-speed
Cassette: Shimano SLX M7100, 10-51 teeth
Chain: Shimano SLX M7100
Converter: Haibike Components The Chainring, 38, aluminum
Brake lever: Magura MT7 HC-lever, aluminum
Brakes: Magura MT7, 203mm, 4-piston disc brake
Tire (front): Maxxis Minion DHF II, 65-622
Tire (rear): Maxxis Minion DHR II, 71-584
Sprocket set: DT Swiss H1900
Handlebars: Haibike Components TheBar ++ 780mm
Grips: Haibike MTB grips
Stem: Haibike Components TheStem 2, A-head, Bar top: 31.8mm
Head composition: A-Head Tapered, Cartridge, aluminum
Saddle: Selle Royal Vivo
Seatpost : Haibike Components Dropper-Post Remote 31.6, telescopic, aluminum
Pedals: Freeridepedal mit Reflector, aluminum
Permitted total weight: 120kg
Wheel size: 27.5 ″
Model year | 2020 |
Gears | 1x12 |
Groupset | Shimano SLX |
Material | aluminium |
Drive | Bosch Performance CX |
Battery | 500 Wh, 756 Wh |
Brakes | Hydraulic disc brakes |
product ID | 98833 |
The table is indicative. On the manufacturer's website, you will find geometry and an accurate calculator for each model, which calculates the size based on height, leg and arm length, and preferred riding style.
Size | S | M | L | XL |
---|---|---|---|---|
Rider height (cm) | 159 - 170 | 168 - 179 | 177 - 188 | 186 - 196 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews