Haibike FullSeven 9 i625Wh Deore 21 cool grey/red
Engine: Bosch Performance CX GEN4, 250W, 85Nm, 25km/h
Display: Bosch Purion
Battery: Bosch PowerTube, 625 Wh
Charger: Bosch Standard Charger 4A
Fork: RockShox Pike Select RC, air, travel: 150mm, Aluschaft 1 1/8 - 1 1/2 '' tapered, Boost axle
Damper: RockShox Deluxe Select Plus, air
Shifting: Shimano SLX M7100, 12-speed
Control lever: Shimano Deore M6100, Trigger controller
Cassette: Shimano HG6100, 10-51 teeth
Chain: Shimano CN-M6100
Converter: Haibike Components, 38, aluminum
Chain guide: Nylon direct mounting
Brake levers: Magura MT5 HC-lever, aluminum
Brake (front): Magura MT5, 203mm, 4-piston disc brake
Brake (rear): Magura MT5, 203mm, 4-piston disc brake
Tires: Schwalbe Nobby Nic Evo, 70-584
Rim: Rodi Tryp 35, riveted, hollow rim, aluminum
Front hub: Haibike Components The Hub ++ Steckachse 15x110mm
Rear hub: Haibike Components TheHub ++ Steckachse 12x148
Tip: SAPI Leader, black
Handlebars: Haibike Components TheBar +++ Gravity 780mm
Grips: Haibike MTB grips
Stem: Haibike Components TheStem 2, A-head, Bar bore: 31.8mm
Head Composition: A-Head Tapered, Cartridge, aluminum
Saddle: Selle Royal Vivo
Seatpost: Haibike Components TheSeatpost ++, 31.6mm, aluminum
Pedals: Platform, aluminum
Allowed total weight: 120kg
Wheel size: 27.5"
Model year | 2021 |
Gears | 1x12 |
Material | aluminium |
Drive | Bosch Performance CX |
Battery | 625 Wh |
Brakes | Hydraulic disc brakes |
product ID | 119194 |
The table is indicative. On the manufacturer's website, you will find geometry and an accurate calculator for each model, which calculates the size based on height, leg and arm length, and preferred riding style.
Size | S | M | L | XL |
---|---|---|---|---|
Rider height (cm) | 159 - 170 | 168 - 179 | 177 - 188 | 186 - 196 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews