GT e-Force AMP 2020 electric bike
Enduro - allmountain fully sprung e-bike with LTS suspension system at 150mm stroke, 29 "wheels, Shimano Steps E8000 250W drive, 504Wh battery.
Model year: 2020
Wheel size: 29 "
Frame: All New EFORCE Alloy 29 "Frame, 150mm Travel, Shimano STEPS Specific, Internal Battery, LockR Pivots, Tapered Head Tube, Boost 12x148 Thru-Axle, 185x55mm Trunnion Shock Mount
Fork: RockShox 35 Gold RL, 150mm, Debonaire, 15x110, 51mm offset
Engine: Shimano STEPS DU-E8000 250W
Battery type: Shimano STEPS BT-E8035, 504Wh
Charger: Shimano EC-E6000-1
Display: Shimano SC-E7000 Cycle Computer
Features: 3 levels to assist - Eco, Trail, Boost, E-Tube project, Di2 compatible
Range: 130 km
Cranks: Shimano FC-E8000, 165mm, X-Sync, 34T
Gear levers: SRAM SX Eagle, 12-speed
Cassette: SRAM SX Eagle, 11-50, 12-speed
Chain: SRAM SX Eagle, 12-speed
Rims: WTB STX i29 TCS, 32h, tubeless ready
Hubs: Shimano MT400, 15x110Shimano MT400, 12x148
Pedals: Without pedals
Brakes: Shimano MT420 4-Piston hydro disc, 203 / 203mm RT30 rotors
Stem: GT All Terra, 6061 Alloy, 31.8, 7 °
Head Composition: FSA NO.42, Semi Integrated, Sealed Bearing, Tapered
Handlebars: GT Alloy riser bar, 15mm rise, 780mm width
Brake levers: Shimano MT420 hydro disc
Wires: Double butted, 14 / 15g
Tires: Maxxis Minion DHF, 29 x 2.6 ", 3C compound, EXO +, tubeless readyMaxxis Minion DHR II, 29 x 2.6", 3C compound, EXO +, tubeless ready
Saddle: WTB Silverado Sport
Seatpost: All Terra Dropper Post, internal routing, 31.6, 100mm (S), 125mm (M), 150mm (L-XL)
Sizes: S, M, L, XL
Muffler: RockShox Deluxe Select R, 185x55mm Metric Trunnion
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM SX |
Material | aluminium |
Drive | Shimano STePS E8000 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 93472 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews