Giant Trance X Advanced E+ 2 29 electric bike, carbon smoke
Giant Trance X Advanced E+ 2 29 electric bike
Drive |
SyncDrive Pro, 85 Nm, powered by Yamaha
|
Battery |
EnergyPak Smart 800, EnergyPak Plus range extender compatible
|
Display |
ANT+ cycle computer compatible
|
Frame |
Advanced-grade composite frame, Advanced-grade rear triangle, Advanced forged composite upper rocker, 140 mm Maestro suspension system
|
Fork |
Fox 36 Float Performance, 150 mm travel, 44 mm offset, Grip 3-position Micro Adjust damper, Boost 110x15 QR, e-optimized
|
Shock |
Fox DPS Performance, EVOL Large Volume sleeve, 3-position Lever, 185x52.5 mm Trunnion mount, custom tuned
|
Shifting |
Shimano Deore SLX
|
Derailleur |
Shimano Deore SLX, 12-speed, Shadow+
|
Cassette |
Shimano CS-M6100, 10-51T, 12-speed
|
Chain |
KMC e.12 Sport, NP/NP, e-bike optimized
|
Cranks |
Praxis Wavetm 36T Cold Forged 4130 premium steel Praxis e-Cadet+ custom forged crankarm set (S: 160 mm, M/L: 165 mm, XL: 170 mm)
|
Brakes |
Shimano SLX, BR-M7120, 4-piston, hydraulic disc, 203 mm
|
Brake levers |
Shimano SLX, I-spec EV
|
Rims |
Giant AM 29", Tubeless ready, 30 mm inner width, e-bike optimized
|
Hubs |
Shimano MT410, Boost, Center-Lock, [F] 110x15 mm [R] 148x12 mm MicroSpline Drive Body Thru-axle
|
Spokes |
Sapim E-Lite [R] Race [F], e-bike optimized
|
Tires |
[F] Maxxis Minion DHF 29x2.6" Foldable, Tubeless, EXO+, 3C MaxxTerra
[R] Maxxis Dissector 29x2.6" Foldable, Tubeless, EXO+, 3C MaxxTerra |
Seat post |
Giant Contact Switch dropper, remote, 30.9 mm
|
Saddle |
Giant Romero, Neutral
|
Stem |
Giant Contact SL 35
|
Handlebars |
Giant Contact 35 Trail, 35x780 mm
|
Grips |
Giant Tactal Pro-E, single lock-on
|
Pedals |
Flatpedal
|
Control unit |
RideControl GO integrated in TT, RideControl Ergo 3
|
Accessories |
Tubeless kit (liquid, valves, levers, manual, tool) Inner tube supplied
|
Model year | 2023 |
Gears | 1x12 |
Material | carbon fiber |
Wheel diameter | 29" |
Drive | Yamaha |
Battery | 800 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 150 mm |
Shock | Air |
Rear travel | 140 mm |
product ID | 226497 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews