Giant Trance E+ 2 Pro, model 2020
Fork: FOX 36 Float Rhythm EVOL 27.5+, travel 150 mm, GRIP damping, Boost solid axle 110x15 mm, 44 mm offset (special fork for electric bicycles)
Damper: FOX Float DPS Performance EVOL
Handlebars: Giant Contact 35 Trail, 35x780 mm
Stem: Giant Contact SL 35
Seat post: Giant Contact Switch, telescopic, 30.9 mm (S: 100 / M: 125 / L: 150 / XL: 170 mm)
Saddle: Giant Contact (Neutral)
Shifting: Shimano SLX, gears 1x12
Derailleur: Shimano Deore XT Shadow+
Brakes: Shimano BR-MT520, 4-piston, discs 203 mm
Brake levers: Shimano BL-MT501
Cassette: Shimano HG-M7010, 11-51 teeth
Chain: KMC e.12 Turbo, EcoProteq, special for electric bicycles
Cranks: Praxis e-Cadet+, Q-factor 168mm / Praxis Wave 36 tooth derailleur (high quality steel 4130, cold forged), chain guide MRP 1X CS
Middle composition: SRAM DUB, press fit
Rims: Giant AM 27.5+, 35 mm internal width
Hubs: Shimano Boost, Center-Lock, solid axle 110x15 and 148x12 mm, rear hub with Micro Spline nut
Spikes : Sapim Race / Sapim E-Lite
Tires : Maxxis Minion DHF EXO TR, 27.5x2.6 / rear: Maxxis High Roller II EXO TR, 27.5x2.6 (tubeless)
Accessories: tubeless system kit
Charger: Giant EnergyPak 6A Smart Charger
Motor: Giant SyncDrive Pro powered by YAMAHA, 80 Nm, 250 W
Sensors: Giant PedalPlus 6-sensor technology
Control unit: Giant RideControl ONE, Bluetooth and ANT+ connectivity
Battery: Giant EnergyPak Smart 500 Wh, 36 V, 13.8 Ah, Lithium-Ion
Model year | 2020 |
Gears | 1x12 |
Groupset | Shimano XT, Shimano SLX, Shimano Deore |
Material | aluminium |
Drive | Yamaha |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 98274 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews