Giant Stance E+ 1 Pro 29, model 2020
Fork: RockShox Recon RL, 130mm travel, Lockout, 110x15mm MaxleLite
Damper: RockShox Monarch RT, High Volume, 184x44mm, custom tuned
Handlebars: Giant Connect TR Riser 31.8x780mm
Stem: Giant Contact
Seatpost: Giant Contact Switch, dropper, 30.9mm (S:100/M:125/L:150/XL:170)
Saddle: Giant Contact, Neutral
Shifting: SRAM SX Eagle 12-speed
Derailleur: SRAM SX Eagle 12-speed
Brakes: Shimano MT520, 4-piston brakes, 203mm
Brake levers: Shimano MT501 Hydraulic Disc
Cassette: SRAM PG-1210, 11-50T, 12-Speed
Chain: SRAM SX Eagle PowerLock, 12-speed
Cranks: SRAM X-Sync Eagle 38T 104BCD chainring Praxis e-Cadet+ custom forged crankarm set (Q-factor=168, S:160, M/L:165, XL:170)
Rims: Giant XCT 29 Tubeless Ready 25mm e-bike optimized
Hubs: Giant eTracker Boost, Sealed cartridge bearing, 6-bolt, [F] 110x15 [R] 148x12mm Thru-axle
Spikes: Sapim E-Lite [r] Race [f], e-bike optimized
Tires: Maxxis Ardent 29x2.4" foldable, 60tpi Dual Compound EXO, Tubeless Ready
Accessories: Giant EnergyPak 6A Smart charger Tubeless kit (liquid, valves, levelrs, manual, tool)
Drive unit: Giant SyncDrive Pro
Sensors: Giant PedalPlus 6-sensor technology
Control unit: Giant RideControl ONE
Battery: Giant EnergyPak Smart 500, 36V 13.8Ah integrated Lithium-Ion
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM SX |
Material | aluminium |
Drive | Yamaha |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 109147 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews