Giant Stance E+ 1 29 electric bike, helios orange
Similar products
Giant Stance E+ 1 29 electric bike
Built for regular rides on unpaved and forest roads, with equipment with a good balance of durability, functionality and performance.
Drive |
SyncDrive Sport 2
|
Battery |
EnergyPak Smart 625 Wh
|
Display |
RideControl Dash
|
Frame |
ALUXX SL-grade aluminum, 125 mm travel FlexPoint suspension system, 148x12 rear axle, Universal Derailleur hanger, 184x44 shock, 1.5~1.8" headset
|
Fork |
RockShox 35 Silver, 140 mm, tapered steerer, 110x15 thru-axle
|
Rear shock |
SR Suntour Raidon R, 190x45 mm, custom tuned
|
Shifting |
Shimano Deore LinkGlide
|
Derailleur |
Shimano Deore LinkGlide, 10-speed
|
Cassette |
Shimano LinkGlide, CS-LG400-10, 11-43T, 10-speed
|
Chain |
Shimano, LinkGlide, CN-LG500
|
Cranks |
FSA Comet E-Bike crank arm set/FSA MegaTooth Direct-mount 1X steel 36T
|
Brakes |
Tektro HD-M750 Orion, 4-piston, hydraulic disc, 203 mm
|
Rims |
Giant AM 29", Tubeless ready, 30mm inner width
|
Hubs |
Giant eTracker Boost, [F] 110x15mm [R] 148x12mm
|
Spokes |
Stainless steel
|
Tires |
[F]: Maxxis Minion DHF 29x2.50" Foldable, TLR, EXO, 60 TPI/[R]: Maxxis Dissector 29x2.40" WT Foldable, TLR, EXO, 60TPI [R]
|
Seat post |
Giant Contact Switch, dropper, 30.9 mm (S: 125 mm/M: 150 mm/ L and XL: 170 mm)
|
Saddle |
Giant Sport
|
Stem |
Giant Contact
|
Handlebars |
Giant Connect TR Riser 31.8x780 mm
|
Grips |
Giant Tactal single lock-on
|
Pedals |
Aluminum Platform
|
Chain guide |
MRP HD2 co-moulded chain guide
|
Control unit |
RideControl Dash
|
Sex | Men, Unisex |
Battery | 625 Wh |
Drive | Yamaha |
Model year | 2023 |
Groupset | Shimano Deore |
Gears | 1x10 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 29" |
Fork travel | 140 mm |
Material | aluminium |
Colour | helios orange |
Fork | Air |
Shock | Air |
Rear travel | 125 mm |
product ID | 232436 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
comment Reviews
There are currently no reviews