Ghost Hybride SLAMR S3.7 + AL - Night Black / Spectra Yellow / Iridium Silver, model 2020
Material: Aluminum
Frame: Hybride SLAMR AL
Fork: Formula Selva S 140 mm
Derailleur: SRAM XX1 Eagle 12-S
Cranks: Samox 34T
Cassette: SRAM PG-1230 11-50
Chain: SRAM NX Eagle
Brakes: Formula Cura 4 4/4 Piston 203 mm Disc
Handlebars: Ground Fiftyone 780 mm Dia. 31.8 mm Rise 15 (S) 25 (M / L) 35 (XL)
Grips: Ergon GA2
Stem: Ground Fiftyone Race Dia. 31.8 mm
Saddle: Ergon SM E-Mountain
Pedals: VSE 527
Wheels: Formula 203 mm
Damper: Cane Creek DB Coil IL SK 140 mm
Motor: Shimano du-E8000
Footer : FRHG0057
Front tire: Maxxis Minion DHF 3C MaxxTerra Exo + 29x2.5
Rear tire: Maxxis REKON 3C MaxxTerra Exo 27.5x2.6
Battery: Shimano BT-E8010 504 Wh
Display: Shimano SC-E7000
Number of gears: 12
Chain guide: GW Shimano Steps Chainguide
Front braided wheel: Syntace V30 15x110 mm
Rear braided wheel: Syntace V30 12x148 mm
Charger: Shimano EC-E6002
Maximum load capacity: 140 kg
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM XX1, SRAM NX |
Material | aluminium |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 88118 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews