GHOST E-Riot Enduro Pro 27.5 electric bike, dirty blue/dirty orange
GHOST E-Riot Enduro Pro 27.5 electric bike
The GHOST E-RIOT is a true Enduro ebike with 170 mm travel at the front and 160 mm at the rear. It perfectly copes with the terrain that you assign to it. Tuned SUPERFIT® geometry and the new Traction Link® suspension system keep the rear wheel in contact with the surface unless you want it to be. The offer includes models on both aluminum and carbon frames and in several mounting levels. With this electric bicycle , you can enjoy the flow without blood and with a little sweat on the way up and then send it down with confidence. The all-new Bosch Smart System® includes the new Kiox 300 display and the Performance CX engine. With the inflated 750 Wh battery, you can get lost in the mountains for the whole day in peace, and it will still bring you home reliably. So jump in and go have fun. …EXPECT RIOT!- Super-responsive Traction Link® suspension (Virtual Pivot)
- Rear construction from one piece of aluminum with maximum torsional rigidity
- SUPERFIT® geometry
- Compact BOSCH Performance CX Smart System motor with 85 Nm of torque
- New Kiox 300 Smart System display and LED Remote controller
- Battery Bosch Powertube 750 Wh Smart System
- Easily accessible charging port with rubber protective cap
- The same size of all pins
- One-piece rockers with maximum stiffness
- Hidden, easily accessible cabling
- Telescopic seat post
- Anchoring the rear brake caliper to a fixed axle - transfers less force and vibration to the rear structure
- Acros Blocklock head composition
Drive |
Bosch Performance CX GEN4 85 Nm
|
Battery |
PowerTube 750 Wh
|
Frame |
E-RIOT CF
|
Fork |
Fox 38 Float Performance eMTB+ 170 mm
|
Shock |
Fox DHX Performance 160 mm
|
Shifting |
Shimano SLX SL-M7100
|
Derailleur |
Shimano XT RD-M8100 12-S
|
Cassette |
Shimano SLX CS-M7100 10-51T
|
Chain |
Shimano SLX CN-M7100
|
Cranks |
e*thirteen e*spec Plus 34T
|
Brakes |
Shimano SLX BR-M7120 203 mm Disc / Shimano XT SM-RT76 203 mm
|
Brake levers |
SHIMANO SLX BL-M7100
|
Wheelset |
Syntace V30 15x110 mm / Syntace V30 12x148 mm
|
Front tire |
Maxxis Assegai 3C MaxxGrip Exo+ 27.5 x 2.5"
|
Rear tire |
Maxxis Minion DHR II 3C MaxxTerra Exo+ 27.5 x 2.6"
|
Seat post |
Eightpins hydraulic 34.9 mm
|
Saddle |
Fizik Terra Aidon
|
Stem |
Syntax Megaforce2 Dia. 31.8 mm
|
Handlebars |
Syntax Vector 7075 high 20,780 mm
|
Grips |
WTB Wafel
|
Headset |
Acros Blocklock 135° AZX-582
|
Pedals |
VPE-527
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Size | S |
Colour | dirty blue/dirty orange |
Material | carbon fiber |
Wheel diameter | 27.5" |
Drive | Bosch Performance CX |
Battery | 756 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 170 mm |
Shock | Air |
Rear travel | 160 mm |
product ID | 213187 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews