Fuji BlackHill Evo 27.5+ 1.1, model 2020, silver
Fork: RockShox Revelation RC/MC 27.5+, DebonAir, Lockout, tapered alloy steerer, Boost 110x15mm Maxlite Stealth thru axle, 35mm stanchions, 150mm travel
Damper: RockShox Super Deluxe Select+, Debon Air, lockout
Cranks: FSA CK-745/IS, Bosch Gen.4, 32T with chainguard, for Boost
Derailleur: SRAM NX Eagle, X-Actuation
Shifting: SRAM NX Eagle Trigger, Single-Click, X-Actuation, Matchmaker type
Cassette: SRAM 1230 Eagle, X-Glide, 11-50T, 12-speed
Chain: SRAM NX Eagle, PowerLink, FlowLink connector, 12-speed
Wheels: Oval Concepts E-400 Boost 27.5", CL hubs, 110x15mm & 148x12mm thru Axle, straight stainless steel spokes, 27.5" 28H tubeless compatible rims
Tires: Maxxis Minion DHF front, Minion DHR II rear, 27.5" x2.8" 3C MaxxTerra EXO+, 120 tpi, Tubeless Ready, folding
Brakes: TRP G-Spec Trail S, 4-piston, hydraulic disc, 203mm rotors
Brake levers: TRP G-Spec Trail S, 2 finger lever
Head composition: FSA NO.57B, 1 1/8" - 1.5", retainer bearings
Handlebars: Race Face Affect, flat bar, 2014 alloy, 10mm rise, sweep: 5 up, 8 back, 35mm clamp, width: 17" - 740mm, 19", 21" - 760mm
Stem: Race Face Affect R, 6061 alloy, 0, 35mm clamp, length: 17" - 40mm, 19", 21" - 50mm
Grips: WTB Waffel, Single lock-on, dual density Kraton
Saddle: WTB High Tail Trail, Comp, e-Bike specific, steel rail
Seatpost: KS LEV-SI Dropper, 30.9mm, remote, travel: 17", 19" - 125mm, 21" - 150mm
Drive unit: Bosch Performance CX, 4th generation mid-motor, 250W rated power, 75Nm of torque, 25km/h maximum assist
Battery: Bosch Power Tube 625Wh with charger
Display: Bosch Kiox Led display, USB charging port, Gorilla glass
Weight: 25.2 kg
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM NX |
Material | aluminium |
Drive | Bosch Performance CX |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 99484 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews