Rock Machine Blizz INT e40-29 electric bike, red/silver/black
Rock Machine Blizz INT e40-29 electric bike
Built for regular rides on unpaved and forest roads, with equipment with a good balance of durability, functionality and performance.
Drive |
Shimano STEPS EP800, 36V, 250W, 85Nm
|
Battery |
DARFON, 504 Wh, in-frame mount
|
Charger |
DARFON 4A Smart plus charger, charging time up to 4.5 hours
|
Display |
SHIMANO SC-EM800, Clamp band
|
Frame |
Alloy Al-6061 T6 Custom tubing, Smooth Welding, Trail Ultimate Geometry, Shark Spine EVO 29er&27.5+, SHIMANO STEPS DU hanger, 2nd Gen. Battery Integration, BOOST 148x12, Disc Brake Post Mount, Replaceable RD Hanger, Inner Cable Routing, Adjust. seat post ready
|
Fork |
RST Vibe TNL-F, Tapered, Coil, 15x110 mm, Lockout, 130 mm travel
|
Shifting |
Shimano Deore SL-M4100-IR, 10-speed
|
Derailleur |
Shimano Deore RD-M5120 Shadow Plus
|
Cassette |
Shimano Deore CS-M4100-10, 11-46T
|
Chain |
KMC X10e EPT
|
Cranks |
Shimano FC-EM600, 34T
|
Brakes |
Shimano BL-M4100/BR-MT420, 180 mm / 180 mm rotor, hydraulic disc brake, metallic pads
|
Rims |
WTB SX23, 32H
|
Front hub |
Shimano HB-MT400, 32H, Center Lock, 15x110 mm Thru Type Axle
|
Rear hub |
Shimano FH-MT400-B, 32H, CENTER LOCK, 12x148 mm THRU Type AXLE
|
Spokes |
Sapim Leader, Stainless Black
|
Tires |
WTB Trail Boss Comp, 29x2.40"
|
Seat post |
ONE1 Alloy, MT171, dropper post 150 & 170 mm travel, 30.9 mm x 440 & 480 mm
|
Stem |
ONE1 TDS-D606 Alloy, 35mm x E35mm, 0°
|
Handlebars |
ONE1 Alloy, MTB AL-3520BT, 6° upsweep, 9° backsweep, 20 mm rise, 760 mm, 35 mm
|
Grips |
Velo VL-G1777D2, Ergo Grip
|
Headset |
ACROS AZX-251, Zero Stack, 1-1/8“x1.5“, BlockLock
|
Pedals |
Pedals not included
|
Max. supported speed |
25 km/h
|
Charging cycles |
1000/60% of original capacity
|
Range |
120 km (ECO mode) w/EP8 range 20% up
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x10 |
Groupset | Shimano Deore |
Colour | red/silver/black |
Material | aluminium |
Wheel diameter | 29" |
Drive | Shimano STePS E8000 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 130 mm |
Telescopic seat post | yes |
product ID | 144547 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews