Rock Machine Bicycle STORM e60-29, 500 Wh, model 2019 17"(M)
SPECIFICATION:
FRAME: Alu 6061.T6 DAPU Multibutted
STROKE (L/W mm): 100 mm
FORK: SR Suntour XCM-ATB DS
SPRING/DAMPING SYSTEM: Coil spring/Rebound adjust
CRANKS WITH CONVERTERS: DAPU Mid motor MD250S 38T w/ Alloy chain cover
REAR DERAILLEUR: Shimano Altus RD-M2000-SGS Shadow
GEAR LEVERS: Shimano Altus SL-M2000 RapidFire Plus
CASSETTE: Shimano CS-HG200-9 11-36
CHAIN: KMC X9e EPT
BRAKES: Shimano BR-MT200 hydraulic disc brake 160/160 mm
CENTRAL COMPOSITION: DAPU
HEAD COMPOSITION: FSA No.10 Semi-Cartrige
PEDALS : Marwi SP-610
FRONT HUB: Shimano HB-TX505 CL QR
REAR HUB: Shimano FH-TX505 CL QR
RIMS: WTB SX19 32H
SPICE: Sapim
TIRES / TUBES: Freedom Dual 29×2.10"
REPRESENTATIVE: ONE Sport 31.8 mm
HANDLEBAR: Alloy raised
HANDLES: Ergo Lock-on
SEAT: ONE Sport
SADDLE: RM XCF Sport
NUMBER OF TRANSMISSIONS: 1×9
E-BIKE SYSTEM: BFI Sport Drive
BATTERY: Panasonic Li-Ion 36 V / 504 Wh-14 Ah
DISPLAY: Round display
DRIVE UNIT: Dapu MD250S, 36 V / 250 W / 60 Nm
MAXIMUM SPEED: 25 km/h
NUMBER OF CHARGING CYCLES: 1000 / 80% of original capacity
CHARGING TIME: 2.5 hours / 4A – 7.5 hours / 2A (depending on charger and battery)
Model year | 2019 |
Gears | 1x9 |
Groupset | Shimano Altus |
Material | aluminium |
Drive | BFI Sport Drive |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 101291 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews