Mondraker Prime RX 29 electric bike, black/marlin blue
Mondraker Prime RX 29 electric bike
Built for regular rides on unpaved and forest roads, with equipment with a good balance of durability, functionality and performance.
Drive |
Bosch Performance Line CX Cruise (25Km/h) GEN4 BS3
|
Battery |
Bosch Powertube 750Wh
|
Display |
Bosch Kiox 300
|
Frame |
Prime 6061 Xtralite aluminum, Forward Geometry, integrated and removable batteries, Boost 12x148mm rear axle, speed sensor integrated
|
Fork |
RockShox 35 Silver TK 29, 120 mm, TurnKey, Solo Air, Boost axle 15x110 mm, offset 44 mm.
|
Shifting |
Sram SX Eagle, 12-speed, X-Actuation 1:1, Single Click
|
Derailleur |
Sram SX Eagle, Roller Bearing Clutch Type 3, Cage Lock, 1x12, X-Actuation 1:1
|
Cassette |
Sram PG-1210, 11-50T, 12-speed
|
Chain |
Sram SX Eagle, 12-speed, Powerlock
|
Cranks |
Race Face Aeffect e-Bike, 165 mm
|
Brakes |
Shame G2 R
|
Rim |
MDK-HP1 29, 30 mm inner width, tubeless ready, 32H
|
Front hub |
Formula DC711, Boost 15x110 mm, sealed bearings, IS 6 screws
|
Rear hub |
Formula EHL148 Boost 12x148 mm, sealed bearings, IS 6 bolts
|
Tires |
Maxxis Grifter 29x2.5, Single Compound, 60TPI
|
Seatpost |
Onoff Pija 31.6 mm
|
Saddle |
FIZIK Terra Aidon X5 145 mm
|
Stem |
Onoff Sulfur FG 30 mm 0º, 6061 Aluminum, 31.8 mm
|
Handlebars |
Onoff Sulfur 1.0, 6061 Aluminum, stroke 20 mm, width 800 mm
|
Grips |
Onoff Diamond, lock-on, 135 mm
|
Headset |
Onoff Saturn for 1-1/8" to 1-1/2" head tube, ACB sealed bearings
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Groupset | SRAM SX |
Colour | black/marlin blue |
Material | aluminium |
Wheel diameter | 29" |
Drive | Bosch Performance CX |
Battery | 756 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 120 mm |
Telescopic seat post | no |
product ID | 191891 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews